I am trying to add an access rule to my list, but am receiving the following error. Can anyone shed some light on this?
access-list inside_access_in line 1 extended permit udp 0.0.0.0 0.0.0.0 range 15^000 15200 host 192.168.5.216 range 15000 15200
% Invalid input detected at '^' marker.
i cut/paste your acl (changing the name to test) and didn't have any trouble. My ASA is running OS 8.2.4. I did a quick search (access-list and range) of the bug toolkit and didn't find anything.
access-list test line 1 extended permit udp 0.0.0.0 0.0.0.0 range 15000 15200 host 192.168.5.216 range 15000 15200
show access-l test
access-list test; 1 elements; name hash: 0xcb4257a3
access-list test line 1 extended permit udp any range 15000 15200 host 192.168.5.216 range 15000 15200 (hitcnt=0)
If you change the 0.0.0.0 to any do you still get the error?
I tried this on my ASA but had no problems at all,
ASA(config)# show run access-list
access-list inside_access_in extended permit udp any range 15000 15200 host 192.168.5.216 range 15000 15200
There's gotta be a character limitation on your SSH terminal client; as rmeans indicated try with any instead of the 0.0.0.0 blocks.
I'm using CLI on ASDM 5.2. I'm receiving lots of strange errors. Including some of the commands from the drop down box. I tried show running-config and I get an error as well.
Result of the command: "show running-config"
ERROR: % Invalid input detected at '^' marker.
Could there be an issue with the unit?
This command works
Result of the command: "show version"
Cisco Adaptive Security Appliance Software Version 7.2(3)
Device Manager Version 5.2(3)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: