HI, i have a cisco ASA 5510 using ASDM version 6.3
We have a webserver that is been written very specifically and i was given super direct "DO NOT DEVIATE" directions.
This server has to get traffic from 3 different PUBLIC ip's that we own. (our isp gave use a block of 12 static addresses) on 4 different ports.
there are the directions i was given
externalIP1:22 -> 172.17.5.50:22 - SSH
externalIP1:443 -> 172.17.5.50:23040 - SIT
externalIP2:443 -> 172.17.5.50:33040 - STAGE
externalIP3:443 -> 172.17.5.50:43040 - PROD
My first question is, using ASDM (my contract employer demands i use ASDM over CLI) how do i get three public addresses to work on one interface. We are authenticating on PPPoE. I know create a virtual interface with the static address but when i do i cannot ping the address from another offsite machine.
secondly, where would i put the traffic redirect in. would i go ahead and create ACL's or just make NAT routes.