cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1820
Views
0
Helpful
5
Replies

ASR 901 SVI based EoMPLS

wandal
Level 1
Level 1

Hi,

I'm trying to configure SVI based eompls on the 901, and this is the error I get:

interface GigabitEthernet0/5

service instance 202 ethernet

  encapsulation dot1q 202

  rewrite ingress tag pop 1 symmetric

  bridge-domain 202

ASR-901-TEST(config)#int vlan 202

ASR-901-TEST(config-if)#x

ASR-901-TEST(config-if)#xconnect ?

  A.B.C.D  IP address of peer

ASR-901-TEST(config-if)#xconnect 10.20.4.15 15 enc

ASR-901-TEST(config-if)#xconnect 10.20.4.15 15 encapsulation m

ASR-901-TEST(config-if)#xconnect 10.20.4.15 15 encapsulation mpls

The Vl202 a vlan interface - command rejected.

The box is running asr901-universalk9-mz.152-2.SNI code.

I realise you can configure the xconnect on the EFP but we were looking to have multiple EVCs share one bridge domain and do the xconnect on the SVI.


Am I missing something or is this feature not supported on the current code?

Thanks.

5 Replies 5

manib
Cisco Employee
Cisco Employee