ASR1006 cannot upgrade rommon

yangyu2 · ‎10-25-2013

ASR1006# upgrade rom-monitor filename bootflash:asr1000-rommon.153-3r.S1.pkg all

Upgrade rom-monitor on Route-Processor 0

Target copying rom-monitor image file

rsync: link_stat "rommon/mcp/RP/RP2/latest.bin" (in rommon_upgrade_pub) failed: No such file or directory (2)

rsync error: some files could not be transferred (code 23) at /auto/mcpbuilds13/release/03.07.03.S/BLD-03.07.03.S/contrib/rsync/main.c(1392) [receiver=2.6.9]

ASR1006#show platform

Chassis type: ASR1006

Slot Type State Insert time (ago)

--------- ------------------- --------------------- -----------------

0 ASR1000-SIP10 ok 00:11:22

0/2 SPA-5X1GE-V2 ok 00:10:14

2 ASR1000-SIP10 ok 00:11:22

R0 ASR1000-RP2 ok, active 00:11:22

P0 ASR1006-PWR-AC ok 00:11:05

P1 ASR1006-PWR-AC ok 00:11:04

Slot CPLD Version Firmware Version

--------- ------------------- ---------------------------------------

0 09111601 12.2(33r)XNC

2 09111601 12.2(33r)XNC

R0 10021901 15.3(1r)S

ASR1006 with RP2, running asr1000rp2-adventerprisek9.03.07.03.S.152-4.S3.bin

Leo Laohoo · ‎10-25-2013

No such file or directory

Means the bootstrap file is not found in the place you've specified, i. e. the bootflash.

Can you please post the output to the command "dir"?

yangyu2 · ‎10-25-2013

ASR1006#dir

Directory of bootflash:/

11 drwx 16384 Nov 25 2010 03:15:16 +00:00 lost+found

193537 drwx 4096 Nov 5 2012 02:14:00 +00:00 vman_fdb

129025 drwx 4096 Nov 25 2010 03:18:18 +00:00 .installer

48385 drwx 4096 Aug 27 2013 23:39:52 +00:00 .prst_sync

64513 drwx 4096 Nov 25 2010 03:47:43 +00:00 .rollback_timer

14 -rw- 2361648 Mar 14 2013 15:28:21 +00:00 asr1000-rommon.153-1r.S.pkg

48386 -rw- 598912444 Aug 27 2013 01:48:16 +00:00 asr1000rp2-adventerprisek9.03.09.00.S.153-2.S.bin

12 -rw- 569597380 Oct 9 2013 13:23:38 +00:00 asr1000rp2-adventerprisek9.03.10.00.S.153-3.S-ext.bin

13 -rw- 15261696 Oct 9 2013 13:25:35 +00:00 asa824-11-k8.bin

209667 -rw- 7745 Aug 23 2013 23:22:13 +00:00 packages.conf

15 -rw- 555312 Oct 25 2013 22:14:35 +00:00 asr1000-rommon.153-3r.S1.pkg

16 -rw- 484677032 Oct 25 2013 22:36:09 +00:00 asr1000rp2-adventerprisek9.03.07.03.S.152-4.S3.bin

The error pops up when I try to upgrade rommon

Leo Laohoo · ‎10-25-2013

I know what is going on ...

Your file is "corrupt" or download was not completed. Look at the file size. It doesn't add up.

Do this command "verify /md5 bootflash:asr1000-rommon.153-3r.S1.pkg 7d7b3342b4922b7216ceea8bf112caf4" and I can assure you this will kick up an error message.

"7d7b3342b4922b7216ceea8bf112caf4" is the MD5 hash value taken from the Cisco website. Besides, look at the file size listed in the Cisco website. The file is suppose to be "2.42 MB".

yangyu2 · ‎10-25-2013

ASR1006#verify /md5 bootflash:

bootflash:asr1000-rommon.153-3r.S1.pkg c818ccd5af831f844646a74ffe33d1d8

........................................................................................................................................Done!

Verified (bootflash:asr1000-rommon.153-3r.S1.pkg) = c818ccd5af831f844646a74ffe33d1d8

MD5 is actually correct.

ASR1000 Series ROM Monitor upgrade package for Gigabit Ethernet Linecard

asr1000-rommon.153-3r.S1.pkg

ASR1000 Series ROM Monitor upgrade package for m8500 and x86

asr1000-rommon.152-4r.S1.fc1.pkg

Confused. What is the rommon upgrade for?

Leo Laohoo · ‎10-25-2013

Resolved Caveats in ROMmon Release 15.3(3r)S1

The following issue has been resolved in Release 15.3(3r)S1:

•CSCui25176

Modified the CPLD's HKP PLL configuration register value in the Cisco ASR 1000 Ethernet Line Card to reflect IBM's recommended value for the correct HKP PLL configuration.

Check out the bug. If you have the line card affected, then upgrade to 15.3(3r)S1. Otherwise, don't worry about it.

The second software is an older ROMmon.

adfsdafs adsfafds · ‎06-29-2014

Try transfer the file in ftp binary mode rather than ascii mode

User404 · ‎08-16-2019

Hello,

I have a similar problem.

I have some ASR1006 chassis with 2x RP2, 2x ESP40 and 2x SIP40 (2x SPA-10G cards in the SIPs).

During the migration I completely followed the official Cisco instructions: https://www.cisco.com/c/en/us/td/docs/routers/asr1000/release/notes/xe-16-9/asr1000-rel-notes-xe-16-9.html#concept_zdm_2nx_5bb

Especially regarding the recommended ROMMON versions:

Cisco IOS XE Release	ASR 1000 RP2	ASR 1000-SIP40	ASR 1000-ESP40
16.9.x	16.9(5r)	16.3(2r)	16.3(2r)

All RPs run on IOS XE 16.9.3 and ROMMON Verion 16.9(5r).
All SIP40s run on ROMMON version 16.3(2r).

Only a few (not all) ESP40 can not be upgraded to 16.3(2r).

The following error message appears:

Target copying rom-monitor image file

cp: omitting directory '/'

md5sum: /: Is a directory

md5sum: /bootflash/EFI/UpdateCapsule/UpdateCapsuleFile.bin: No such file or directory

Does anyone have any idea where the problem is or how to solve it?
Below you can see the whole CLI output:

Router#    sh ver
Cisco IOS XE Software, Version 16.09.03
Cisco IOS Software [Fuji], ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.9.3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Wed 20-Mar-19 08:02 by mcpre

Router# sh platform 
Chassis type: ASR1006             

Slot      Type                State                 Insert time (ago) 
--------- ------------------- --------------------- ----------------- 
0         ASR1000-SIP40       ok                    00:04:27      
 0/0      SPA-1X10GE-L-V2     ok                    00:03:05      
 0/2      SPA-1X10GE-L-V2     ok                    00:02:57      
1         ASR1000-SIP40       ok                    00:04:27      
 1/0      SPA-1X10GE-L-V2     ok                    00:03:05      
 1/2      SPA-1X10GE-L-V2     ok                    00:02:53      
R0        ASR1000-RP2         ok, active            00:04:27      
R1        ASR1000-RP2         ok, standby           00:04:27      
F0        ASR1000-ESP40       ok, active            00:04:27      
F1        ASR1000-ESP40       ok, standby           00:04:27      
P0        ASR1006-PWR-AC      ok                    00:03:56      
P1        ASR1006-PWR-AC      ok                    00:03:55      

Slot      CPLD Version        Firmware Version                        
--------- ------------------- --------------------------------------- 
0         00200800            16.3(2r)                            
1         00200800            16.3(2r)                            
R0        10021901            16.9(5r)                            
R1        10021901            16.9(5r)                            
F0        1003190E            16.2(1r)                            
F1        1003190E            15.3(3r)S

Thanks!