Hej
We are seeing a weird behavior where ASR9006 sattellite (ASR9000-V2) is dropping packets on ingress.
We tried many different combinations on the interface regarding vlan operations but it just keeps dropping packets coming from CPE side even if we configure encapsulation as default.
There doesn't seem to be anything wrong with VPLS it self since it learns MAC from remote site no issues
Version= 5.3.4
interface GigabitEthernet100/0/0/0.300 l2transport
description VPLS encapsulation test - Match .1q vlan 300
encapsulation dot1q 300
rewrite ingress tag pop 1 symmetric
mtu 9192
!
l2vpn
autodiscovery bgp
signaling-protocol bgp
mtu mismatch ignore
!
!
bridge group VPLS-TEST
bridge-domain BD-TEST
interface GigabitEthernet101/0/0/0.300
!
vfi VFI-VLAN300
vpn-id 9998
autodiscovery bgp
rd 37.205.126.51:9998
route-target 44508:9998
signaling-protocol bgp
ve-id 200
We see ASR dropping input traffic from local side
RP/0/RSP1/CPU0:test5pe1dk-ASR9006#show interfaces gigabitEthernet 100/0/0/0.300 | i input
Fri Nov 26 13:18:26.556 UTC
Last input 00:00:00, output never
3054 packets input, 195456 bytes
3055 input drops, 0 queue drops, 0 input errorsLearning Remote MAC but NOT local MAC
RP/0/RSP1/CPU0:test5pe1dk-ASR9006#show l2vpn forwarding bridge-domain mac-address location 0/0/CPU0
Fri Nov 26 13:21:31.236 UTC
To Resynchronize MAC table from the Network Processors, use the command...
l2vpn resynchronize forwarding mac-address-table location <r/s/i>
Mac Address Type Learned from/Filtered on LC learned Resync Age Mapped to
------------------------------------------------------------------------------------------
d8b1.225c.4500 dynamic (37.205.126.25, 9998) 0/0/CPU0 0d 0h 0m 12s N/A
