10-14-2020 03:29 AM
Hi
I want to implement PBR on ASR903_RP3_400. during my researches I found this link which says the feature is not supported on RP3. It this correct?
https://www.experts-exchange.com/questions/29112865/ASR-903-PBR.html
Thank you
Peyman
Solved! Go to Solution.
10-14-2020 04:39 AM
HI
In the document, you sent it is mentioned the RSP3 does not support PBR
I also found document for Train 16 and This restriction is there:
Thank you for help and support
10-14-2020 03:57 AM
Sometime hard to say, since cisco some features will be support based on the model.
right option is : check feature navigator or contact local Cisco SE to suggest better.
10-14-2020 04:02 AM
Hi
Thank you for the update,
FN does not have information about ASR903
10-14-2020 04:04 AM
Following this guide , I would presume that it should, I would suggest to follow the configuration guidelines and check.
M.
10-14-2020 04:32 AM
Hi
Thank you for the update, I will check this
10-14-2020 04:39 AM
HI
In the document, you sent it is mentioned the RSP3 does not support PBR
I also found document for Train 16 and This restriction is there:
Thank you for help and support
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide