cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
739
Views
0
Helpful
3
Replies

ASR9K init_obfl_card

samy
Level 1
Level 1

Hi All,

I have following software issue with ASR9001
Could anyone help on finding the solution,
Does anybody knows where the mistake is hidden ?

 

 

RP/0/RSP0/CPU0:ios#show install active
Mon Jul 15 09:48:48.582 UTC
Secure Domain Router: Owner

Node 0/RSP0/CPU0 [RP] [SDR: Owner]
Boot Device: disk0:
Boot Image: /disk0/asr9k-os-mbi-6.1.4/0x100000/mbiasr9k-rp.vm
Active Packages:
disk0:asr9k-mini-px-6.1.4

Node 0/0/CPU0 [LC] [SDR: Owner]
Boot Device: mem:
Boot Image: /disk0/asr9k-os-mbi-6.1.4/lc/mbiasr9k-lc.vm
Active Packages:
disk0:asr9k-mini-px-6.1.4

RP/0/RSP0/CPU0:ios#

 

 

RP/0/RSP0/CPU0:Jul 15 09:28:22.070 : envmon[211]: %PLATFORM-ENVMON-3-OPERATION_FAIL : Failed in init_obfl_card_temp.5125, error code OBFL temperature initialization failed
RP/0/RSP0/CPU0:Jul 15 09:28:42.086 : envmon[211]: %PLATFORM-ENVMON-3-OPERATION_FAIL : Failed in init_obfl_card_volt.5935, error code OBFL voltage initialization failed
RP/0/RSP0/CPU0:Jul 15 09:29:01.626 : obfl_agent-rp[343]: %PLATFORM-OBFL-3-ERR_CREATE : Failed to create the OBFL environment record
RP/0/RSP0/CPU0:Jul 15 09:29:02.134 : envmon[211]: %PLATFORM-ENVMON-3-OPERATION_FAIL : Failed in init_obfl_card_syslog.4910, error code OBFL syslog initialization failed
RP/0/RSP0/CPU0:Jul 15 09:29:07.282 : envmon[211]: %PLATFORM-ENVMON-2-ENV_CONDITION : Outstanding environmental condition exists in the chassis
RP/0/RSP0/CPU0:Jul 15 09:30:01.913 : obfl_agent-rp[343]: %PLATFORM-OBFL-3-ERR_CREATE : Failed to create the OBFL uptime record

 

Best regards,
Samy

1 Accepted Solution

Accepted Solutions

if you have smart contract contact TAC so they can assist better.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame

i have seen same bug reported below, worth checking

 

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvg51349/?rfs=iqvred

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

samy
Level 1
Level 1

Many Thanks for your answer, but actually I already had seen this page.

It seems to me the case is a bit different concerning another release combined with a mini skyhammer card (A9K-4X100GE).

if you have smart contract contact TAC so they can assist better.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: