cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
161
Views
0
Helpful
3
Replies
Beginner

ASR9K init_obfl_card

Hi All,

I have following software issue with ASR9001
Could anyone help on finding the solution,
Does anybody knows where the mistake is hidden ?

 

 

RP/0/RSP0/CPU0:ios#show install active
Mon Jul 15 09:48:48.582 UTC
Secure Domain Router: Owner

Node 0/RSP0/CPU0 [RP] [SDR: Owner]
Boot Device: disk0:
Boot Image: /disk0/asr9k-os-mbi-6.1.4/0x100000/mbiasr9k-rp.vm
Active Packages:
disk0:asr9k-mini-px-6.1.4

Node 0/0/CPU0 [LC] [SDR: Owner]
Boot Device: mem:
Boot Image: /disk0/asr9k-os-mbi-6.1.4/lc/mbiasr9k-lc.vm
Active Packages:
disk0:asr9k-mini-px-6.1.4

RP/0/RSP0/CPU0:ios#

 

 

RP/0/RSP0/CPU0:Jul 15 09:28:22.070 : envmon[211]: %PLATFORM-ENVMON-3-OPERATION_FAIL : Failed in init_obfl_card_temp.5125, error code OBFL temperature initialization failed
RP/0/RSP0/CPU0:Jul 15 09:28:42.086 : envmon[211]: %PLATFORM-ENVMON-3-OPERATION_FAIL : Failed in init_obfl_card_volt.5935, error code OBFL voltage initialization failed
RP/0/RSP0/CPU0:Jul 15 09:29:01.626 : obfl_agent-rp[343]: %PLATFORM-OBFL-3-ERR_CREATE : Failed to create the OBFL environment record
RP/0/RSP0/CPU0:Jul 15 09:29:02.134 : envmon[211]: %PLATFORM-ENVMON-3-OPERATION_FAIL : Failed in init_obfl_card_syslog.4910, error code OBFL syslog initialization failed
RP/0/RSP0/CPU0:Jul 15 09:29:07.282 : envmon[211]: %PLATFORM-ENVMON-2-ENV_CONDITION : Outstanding environmental condition exists in the chassis
RP/0/RSP0/CPU0:Jul 15 09:30:01.913 : obfl_agent-rp[343]: %PLATFORM-OBFL-3-ERR_CREATE : Failed to create the OBFL uptime record

 

Best regards,
Samy

3 REPLIES 3
Highlighted
VIP Advisor

Re: ASR9K init_obfl_card

i have seen same bug reported below, worth checking

 

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvg51349/?rfs=iqvred

BB
*** Rate All Helpful Responses ***
Beginner

Re: ASR9K init_obfl_card

Many Thanks for your answer, but actually I already had seen this page.

It seems to me the case is a bit different concerning another release combined with a mini skyhammer card (A9K-4X100GE).

VIP Advisor

Re: ASR9K init_obfl_card

if you have smart contract contact TAC so they can assist better.

 

BB
*** Rate All Helpful Responses ***
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards