Assign ACS url trough PPPoE on ASR1001-X (TR-069)

[andy89]

Hi,

we are using the Cisco ASR1001-X as core router on our ISP network. For the management of the CPE I set up a TR-069 ACS server. For testing purposes I configured the ACS URL manually on the CPE, which works fine.

However I'd like our ASR to pass the URL automatically along with the PPPoE request from the CPE which would allow us to integrate automatically all routers installed at our customers. As radius server we use FreeRADIUS.

Is there a way to achieve this on the ASR1001-X?

Appreciate any suggestion.

[andy89 · Accepted solution]

I have found a solution. With the attribute Reply-Message configured on the Radius server I can pass the ACK/NAK message to the CPE.

Reply-Message := "SRD=50000#SRU=10000#TR069URL=https://myacs.xyz123.com:7547#TR069PROVC=setup#"