cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
688
Views
0
Helpful
4
Replies

ATM AIM Modules

steve.kerr
Level 1
Level 1

I am installing 3 times VWIC2-2MFT-T1/E1 in a 3825 to provide 6 E1 connections running ATM PVC's. I will have 2 times AIM ATM installed in the router as each AIM ATM will only support a maximum of 4 E1's. I need to split my E1 ATM links into 2 bundles of 3 and therefore will need to split the two E1 interfaces on one of my VWIC2-2MFT-T1/E1's across 2 AIM ATM's. i.e. controller E1 0/2/0 will be on atm aim 0 and controller E1 0/2/1 will be on aim atm 1.

Will this configuration work?

Am I likely to encounter any timing problems?

4 Replies 4

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Steve,

about clocking it cannot be independent on each port for the ATM IMA

see

http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html

The Cisco 2-port MFT VWIC2s also can enable each port to be clocked from i