06-10-2008 10:16 AM - edited 03-03-2019 10:18 PM
I know this is a very naive and novice question, but I have 2 point to point T-1's that I would like to connect to the following card in a 7206 VXR:
PA-A3-8T1IMA=
Is there any confiration that will allow me to utilize this card with serial T-1's?
Solved! Go to Solution.
06-10-2008 10:23 AM
Hi,
You can use that card, but on the other side of the circuits you will need another ATM IMA interface of some kind. You cannot connect ATM IMA to non-IMA equipment directly, and there are no workarounds to that.
Hope this helps, please rate post if it does!
06-10-2008 10:23 AM
Hi,
You can use that card, but on the other side of the circuits you will need another ATM IMA interface of some kind. You cannot connect ATM IMA to non-IMA equipment directly, and there are no workarounds to that.
Hope this helps, please rate post if it does!
06-10-2008 10:24 AM
That's what I thought...hmmmm...I'll have to dig around in the parts drawer and see what I can find. Thanks.
06-10-2008 10:42 AM
You're welcome, please remember to rate useful posts.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: