Finding accurate answers to your questions and issues is always gratifying, but what if these answers are shared globally across different languages? The Cisco Community team has been working on a proof of concept (PoC) to take Accepted Solutions in...
Anyone know why I can't select my other VLANs for this routing ( I have 3)? Also I don't see the routes when I run show ip route after adding them, applying and saving! What's up with that?
I have a CISCO 881 router connected with Layer 2 switch also ISP SIM router for internet is connected with Layer 2 switch Layer 2 switch having 2 vlans - Vlan 1vlan 50want vlan to communicate with each other and also have interent access on both the...
i have a 2960 with routing enabled i would like it to route traffic like port 80, 433 ... but send all other traffic to an other router / firewall (isr c1111) for routingcan this be done in some way? sopc1 vlan 1pc2 vlan 2if pc1 calls a http side on...
i have 1 isp 2911 router ------- sw(witches connected to my isr 2911 router take the time from ntp server )------sw(witches connected to my isr 2911 router take the time from ntp server ) regarding the syslog configuration as below should i applying ...
