Finding accurate answers to your questions and issues is always gratifying, but what if these answers are shared globally across different languages? The Cisco Community team has been working on a proof of concept (PoC) to take Accepted Solutions in...
Morning all, we have a number (57) of site Routers that are experiencing the same problem with BFDFSM Detect Timer Expired.We've got 17.09.04a on our C1111'sThis is from the logs from one of the Routers:Nov 19 18:54:42.268 GMT: %BFDFSM-6-BFD_SESS_DOW...
Hi,I have Cisco C1117-4PWA Chassis and it comes with external power supply ac/dc adaptor. I am wondering if it can be connected directly to dc power source(replacing external power supply adaptor it comes with) for the system power. Does that void my...
Hello,I already posted this situation previously, but now I think I found out the exact problem. The ARP does not want to clear up. It is populated up to 15360 entries and stuck. Internet is working only for the websites that were previously opened a...
Evening,We have several C1111 Routers that were running 16.9 with perpetual traditional licences, since moving to 16.10 smart licensing has been enabled and all our licences are now showing as expired.I've tried transferring them over to smart licens...
I'm having issues trying to get my C1111 to register with Smart, I've already configured one Router successfully but two others are getting the following errors.*Nov 15 16:06:13.372 GMT: http_client_process_request: host_name = tools.cisco.com*Nov 1...
Hello all,We are acting as a pre-deployment staging centre for our client.We push a config down to C-1111 routers using the APIC-EM module accessed via a jump server on the customers’ network.C-1111 takes a config successfully, however does not hold ...
Hallo, I have the below EEM script configured in C1100 router and I am trying to manually trigger it but it is not working. What could it be that I am doing wrong? event manager applet IP-CHANGEevent noneaction 3.0 cli command "enable"action 4.0 cli ...
i have a c1111 set up for serving as a vpn server i can connect to it with a desktop and anyconnectto set that up was quiet a hassle for me so i dont want to mess with its settingsi am not at the location and would need access to the local network on...
For the life of me I can't find where the 1100 console gateway server software is for C1100TG-1N32A c1100tg-universalk9.17.03.04a.SPA.bin Should i just be using the 1100 series ios xe software! https://software.cisco.com/download/home/286315006/type...
With reference to vulnerability " https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-iosxe-webui-privesc-j22SaA4z "what is the difference the commands between "ip http active-session-modules none" and "no ip http"....
Hi guys... can anyone give me some light here?I've been trying to get LTE configured on an ISR 1127 with IOS-XE 7.9. And I just can't get it working and I don't know what I'm missing.I read this post... but it didn't help https://community.cisco.com/...
Hello, I have a C1111-4P router and was wondering if I can put a route that will redirect the default gateway of a device. My device has an IP of 10.10.15.66/28 with a default gateway to 10.253.65.254, but it should have been to 10.10.16.78. Is ther...
Hello, thanks in advance for any help. So I have an office on which we decomissioned the internet circuit. We are currently using MPLS as egress traffic, and then routing that traffic to another office to use as breakout. To do so, I have set up a G...
Hi all, I am trying to configure Cisco C1111 router, getting the WAN connection from an existing NETGEAR V7610, which will work as a VDSL modem. WAN <-> NETGEAR (192.168.15.1) <-> (192.168.15.53) CISCO (192.168.1.1) <-> (192.168.1.x) PCs I have confi...
Hi, I have two questions with this particular device. 1. Can i downgrade directly from 17.6 to 16.9.x? If so what are the requirements. 2. For me to support DMNR, do i need to have appx license? Your answers will be greatly appreciated
