Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Webinar

 
Labels

Forum Posts

Hello,    Can someone explain to me what does mean the following commands please :    mls qos map cos-dscp 0 8 16 24 32 46 48 56mls qos srr-queue output cos-map queue 1 threshold 3 5mls qos srr-queue output cos-map queue 2 threshold 3 3 6 7mls qos sr...

Resolved! OSPF and VLANs

Scope of Inquiry:I've supported heterogeneous networks for merely a decade, but never quite big enough to expose me to Enterprise routing/switching concepts in real-time. I've supported numerous Metro Ethernet hub and spoke topologies, as well as a f...

worldnews7 by Level 1
  • 30569 Views
  • 12 replies
  • 0 Helpful votes

Currently we have a 2901 router that connects to our ISP and have a 100/100 circuit. We will be upgrading to a 1Gb circuit here shortly and will need to replace the router so we can have 3 ethernet ports ( I know we can buy a card for the 2901 but a ...

jkay18041 by Level 3
  • 675 Views
  • 2 replies
  • 0 Helpful votes

Very interesting behaviour :   show license: Index 1 Feature: advancedmetroipaccess Period left: Not Activated License Type: Evaluation License State: Active, Not in Use, EULA not accepted License Count: Non-Counted License Priority: NoneIndex 2 Feat...

hans.goes by Level 1
  • 2451 Views
  • 3 replies
  • 0 Helpful votes

Hi, We used to have a RV016 and we repalced it recently with a RV325. The same setup used to work fine on the RV016, but can't seem to make it work the same way on the new router. We have 2 machines (a NAS and a DVR) with port forwarding setup. I can...

AlexSST by Level 1
  • 643 Views
  • 1 replies
  • 0 Helpful votes

Hi, I want to know how to track if you have 3 internet interface.   If Primary internet interface down or lost ping, then will go to secondary internet interface.   If both Primary and Secondary go down, then go to third one.   Does anyone how to con...

Resolved! PAT Troubles

I have the following topology :     I have an ethernet connection to another route out the opposite-side port of my LAN where I have the two vlans configured (VLAN, 10 (Marketing) and 20 (Sales)) Before I set up the following ACL and the following c...

acltroubletop.PNG PATfund.PNG
LateLearn by Level 1
  • 1735 Views
  • 7 replies
  • 0 Helpful votes

Hi All,   We have 2 x 5512-x ASAs, one in our LA location and one in our PA location. The one in LA (let's call it ASA01) is in production and I have the tunnel configured. The one in PA (ASA02), is set up but it sits behind a Netgear router. From th...

shoong001 by Level 1
  • 574 Views
  • 6 replies
  • 0 Helpful votes