Routing

Hello, I have been spending the past few hours trying to find information on a question I was asked.  The question is, "what is the average connect/reconnect time on an average Cisco Network device?  Being an engineer myself I understand this is a v...

Hello, maybe some one help me? I have 1841 with HWIC-1ADSL but maximum download speed in my case is 14199 for Capacity Used:   70%. Other Modems on this line get me more 16000. Can posable get more download speed? sh dsl interface atM 0/0/0ATM0/0/0A...

Hello, I have a question concerning the logic of  VPN IPSEC through interface tunnel. I found a lot of example concerning this kind of configuration but my understanding is blocked...  Example of configuration: # CONFIGURATION OF PHASE 1 crypto isa...

Hi,  I understand that this forum is dedicated for issues related to Cisco devices & Network related  , I hope my concern raised below does relate to Network issue.  I have recently noticed a issue reported by a user in my office network stating tha...

Hi everybody. We have a Cisco chassis switch C7010 (NXOS 6.2.16) as a core of the Ethernet lan. Where we aggregate trunk ports from all Ethernet nodes. But in there switch no have classic "loop detection" function. How i understand that is possible r...

Hello, a customer has two ISPs and it's own AS. For each ISP we use a router which is connected with BGP to the ISP.  The LAN has it's default route pointing to the firewall which in turn uses the default routes which comes from the (two) ISPs via BG...

I have a T1 link between two offices with a Cisco 1921/K9 using Serial0/0/0 connected to the T1 at each end. We have had periodic bandwidth issues with this link for some time now including with previous routers we were using. Every time we call our ...

Is the idea for APIC EM to essentially replace the Live Action piece of the cisco iwan? It seems APIC EM is coming a long way and looks to maybe be a single product for the iwan rather than having multiple products to manage the iwan solution.

Hi All, I have 7206 router with NPE-G2. One interface is connected to ISP and another interface is connected to Cisco-2960. All other devices are connected to 2960. Virtually there is no configuration present on the router other than default route t...

Hi, I have 2 SSID broadcasting from the same radio. Can I have them have their own network address so that the different SSID can ping to each other. And is it possible to set them so that people connected to it have different levels of access? Thank...

Hi All Can anyone tell me what applications the Cisco WAAS appliance is most effective on? Also how much bandwidth saving on average can I expect to save for CIFS? Netapp snapmirror etc , sql database etc ? cheers

Hello All,  I need assistance opening ports 8081 & 8082 on my network to connect to a cloud application.  I opened a ticket with Cisco TAC and they told me I can only do static NAT one to one.  I need these ports opened to my entire network, how can ...

Dear Cisco Support My entire network coming working with OSFP without any problem.- Recently we need to make some changes for probe Allot for mamangement the traffic QoS etc.- The point is that, actually we have two type of IP Address, Public and pr...

Hello, I've been told by my ISP to increase the MTU size to 9198 on my Cisco 3650.  It's currently set to the default 1500 mtu.  In order to accomplish this I would need to use is the global system mtu command. I'm wondering if this will cause any i...

I have this peculiar problem and I hope somebody could shed some light onto it. I was running out of public IP addresses, so I ordered a new /27 range from the ISP, so I could do more NAT, but somehow I am failing to make it work. Really looking for ...