Finding accurate answers to your questions and issues is always gratifying, but what if these answers are shared globally across different languages? The Cisco Community team has been working on a proof of concept (PoC) to take Accepted Solutions in...
Hello everybody, I am trying to get my Cisco 2811 to authenticate four DSL connections and load balance them by attaching the four DSL to a switch (each DSL going to a seperate VLAN) and then trunking all four VLAN's to a ethernet interface on the 28...
Hi,I've bought a CISCO 1921 K9/SEC a few days ago. But I'm unable to setup my first CISCO device on my own:Network-overview:ISP CISCO 1921 LAN192.168....
Hi all!!We are having some problems in our Routers equiped with this card EHWIC-VA-DSL-M.There are some situations in that these card cant sync from the DSLAM but if we use another Router (non CISCO eq) the line syncs.We change this card in one of th...
HiI'm new to cisco, I just bought a 5505 to learn from and am trying to attach my VDSL modem as a transparent bridge.It goes.... Laptop >>> (VLAN1) Cisco 5505 (VLAN2) >>> VDSL modem >>> internetX.X.X.10 >>> (X.X.X.254) ------ (Y.Y.Y.254) >>> Y....
I have installed VWIC-1MFT-G703 on Cisco 2811 with PVDM, but my question ->For Cisco 2901, do I have to install PVDM to make VWIC3-2MFT-G703 available????
Maybe I'm misunderstanding somthing:I use EIGRP as my LAN routing protocol with my pair of Nexus5500 switches in vPC. This works fine.I want to fire up routing between the Nexus boxes and a Checkpoing firewall cluster. I fire up OSPF for this. Nexus ...
Hi all,i have some issue while adding cisco switches on solarwinds.......from my switch i can ping solarwinds server but when i put the snmp community credentials in solarwinds and test it, i'm not able to test it successfulysnmp-configuration on swi...
Does anyone have a working config for this setup, I configured using the BT instructions but still no internet, I have tried various solutions from the forums but still no internet or ability to ping outside networks. I have in vain tried to get the ...
HelloCurrently i cannot use many android apps online, including the Play Store & Spotify.My desktop, laptop & other network equiptment work fine.This problem only seems to affect mobile devices.http://i42.tinypic.com/dvk3fd.jpgThey work via the mobil...
Hi,in my lab i have this topology :between R1 and R4 there are two links.i want to know how can i use Ipsla on router R1 to track 199.99.9.9 and to have only one operational link , and when it's down ,the second one replace it automatically. regar...
Hi...I would like to know that.......How many numbers of GRE Tunnels are supported on Cisco 3925 router?Thanks....
Dear All,My HO is connected to BOs over MPLS Links.The links are terminated on routers but i dont have access on those routers as it is maintained by the ISP.Behind of the HO router there is s 3560 switch. Can i configure this switch to prioritize so...
Hello,I have an remote office with a flat /24 network.Users / Servers connect to 2 x 3560 Cisco switches which are uplinked to 2 x Cisco 3925 routers for Internet connectivity and VPN.We are planning to install VoIP in the office and would like to kn...
Hi,Still learning this so please bear with me.I have set up a VPN between 2 routers that are connected over 2 ADSL lines and layer 3 traffic transmits and receives ok. My problem is that i also need to transmit and receive layer 2 traffic and this is...
Hi,SM-ES3-16-P works as a layer 3 module which means that the uplink which connects to router ( Internally ) is a layer 3 interface . Is there a way we can use it as a layer 2 switch and connect the uplink as a trunk port ?
| User | Count |
|---|---|
| 13 | |
| 11 | |
| 9 | |
| 8 | |
| 7 |
.jpg "VIP Mentor"){kind=icon}
.jpg "Hall of Fame Master"){kind=icon}
