Routing

Hi, I searched a lot but couldnt find a clear document about connecting 2 G.SHDSL routers back to back.First of all I am not sure which type of cable (RJ11) is used for connecting two 878 routers.Does it have to be cross or straight cable.Is there an...

Friends,One of my Financial Software Development customer has a requirement of Public IP’sTo connect to his end customer, my customer requires 1:1 NAT for each user. Any repeated request from Same Public IP is not accepted by end customer device. Bec...

We have two main sites, site A and site B, that communicate via point to point WAN links using BGP. We have two routers, Site A (route1 and Router20 and Site B (Router1 and Router2) at each site with four differant AS numbers. We use OSPF as our IGRP...

Does anyone out there have a config for a 1760 to support AT&T's ADSL 6meg, I would like to compare it to what I have.Sent from Cisco Technical Support iPad App

Guys is it possible that a public IP can be automatically routed to another public ip.For example I have two routers A and B.router B has a LanB in 10.0.0.0 network and the public ips are in the x.x.x.0 for internet access.router A is located at a re...

Dear All,Am new to Nexus switching, i have a  Nexus box that i need to link with IBM servers with 10GB Network Cards.could somebody guide me on how to set up fiber channel on this machineJude.

Dear all ,I have a cisco box Nexus 5548 box i need to setup.what is the basic configuration i need to do so as to setup the following:1. Management interface2.Reduce the switch priority to join other switches in the network3.setup etherchannel etc

Hello, I´m a Telecom & Network Engineering Student from Peru.  My professor have asked us to do an IOS upgrade for a Cisco 827 ADSL Router.       But I´am having problems to find the appropiate IOS image.  The router  original IOS is c827-y6-mz.121-...

I have my first ASR and it has a IP Base on it.  I however want to do SSH instead of telnet to the unit and this does not seem to be an option.  Do I need something besides IP base?  The version I have is asr1001-universal.03.06.00.s.152-2.bin.      ...

Hi, I want to provide some outside interface protection on an ASR 10001 router. The Internet facing interface is the ingress for all remote access home users that have created a DMVPN. I want to protect the network from the Internet but, at the same ...

I have been trying to connect a  new Cisco 887VA Router to the Internet using ADSL via PPPoE and have  been unsuccessful. The DSL line is active and functioning correctly  since the current "old" router is connected and working without any  problems ...