Routing

Hi experts,Due to my customer has just a few experience on enterprise switch such as Catalyst. He dont trust on WHATS QoS. Just right deploying IP VDO along with VOIP. So, I need to do him a PoC to prove him like 7Mbps VDO input for 7-10 ports. Then ...

Hello,I need to reconfigure an exisiting network but i don't know how to do it:I have a building with 2 existing customers that need to be seperated from each other, but share a regular internet line and connection to CUCM.Here some info about the ne...

Dear friendI am using 3845 router at Head office. My server should reachable from different network. I am using Static nat as follows :ip nat inside source static 192.168.0.14 172.25.40.118 route-map NAT_25 ip nat inside source static 192.168.0.14 17...

                  when i config route-target import or export , is there any limitation on maximum numbers of route-target.                  i heard it is 64 on cisco ios, when i config more than 64 route target ,is there any problem?

Hi Everybody ,Please help me to give me appropriate difference between these two terms

hi,I would like to know if there is a way to send out a route to another router based on the source of the router receiving the route from me.so basically lets say I have a setup like a Vthe bottom is a hub, the top of the V are spokes.ideally I want...

Hi All,Im setting up HUB and Spoke environtment. No communication needs between spoke. All sites in area 0. HUB in 172.16.0.0/16 segment. 10 Spoke in 172.17.x.0/24 segments.I dont wants HUB send route to spoke that it learn from another spoke as by d...

Hi,I have created a network topology by using GNS3, I have created a DNS server behind router 3600.All other work stations are also behind diffrent routers, with diffrent external addresses.No issues to ping external ip address of the DNS router from...

Hello Dear,when i was try to upgrde my 12000 router IOS from 3.6.2 to 3.9.2, i faced this error :RP/0/4/CPU0:***(admin)#install activate disk0:*3.9.2* syncInstall operation 12 '(admin) install activate disk0:*3.9.2* synchronous'started by user 'cisco...

                   Hi guys,     I have tried to change it to max-reassemblies in ios 15, but, no luck.  It still shows the ip -virtual-reassembly in.  Checked the interface and still at 16.  Obviously, I have the syntax wrong to change it...Ideas?Tha...

I'm having a problem with port forwarding on my 1941W router.I would like to forward ports 8001 and 2001 TCP from Internet to a local host on the internal network.I am able to connect to the local host from the internal network, but it does not work ...

Hi every one, I have to discuss a well know case study!  I want two ISP connection to my corport office ( hunderd of users). I want to run BGP ( Multihomed). I have confusion regarding ASN. Is i need IANA ASN or ISP will provide me the private ASN ( ...

Hi all,We have a dsl connection on 897 dsl router at the customers HO.The telephone line is directly connected to router we configured dialer with username and password and it takes a static ip of 212.249.213.xxx.Now he has some branches that are con...

Hi forum,I am working on a QoS project. I want to mark some kinds of traffic generated by router itself such as ICMP, syslog, Netflow and SNMP . I intend to mark them as Management Services and as DSCP af32 then put af32 and af31, which I already mar...