Routing

Hi!We'd had 5 switches in the stack and everything was ok. but then we connected a new 6th switch so I can see periodical short loosing packets. It happened on many hosts connected to these stack at different time. Cpu load is ok and no any errors in...

Is there a command that will tell me what routes are being advertised to a specific AS number? I have a router that shows two different neighbor peers, with two different AS numbers. The router is running:router bgp 64707no synchronizationbgp log-nei...

Hi all,We just finalized a setup of three WAAS appliances, two 594 as appliacation accelators and a 294 as a Central Manager. We are using wccp for redirection and traffic seems to flow as it should through the waas appliances but there is no optimaz...

Hi All -  I am currently working on my first ASA5510 configuration and am running into some issues. The ASA is running 8.2(5). The network setup is as follows:Layer 3 switch with 4 VLANs with ip routing enabled.All systems are pointing to the 3560 as...

Hi all,I need a suggestion on something very basic. There is a requirement for having a Site-to-Site tunnel.Instead of terminating internet connectvity on a cisco router and connecting router to an ASA firewall, can we terminate the internet connecti...

Good day all,I have a customer who wants to do a static mapping in order to prevent any downtime for one of his public web servers. Can someone give me a good example to follow? FYI, the edge device is:CISCO1941W-A/K9 (configured as a zone based fire...

i want to use ipv6 stateless config to give an ipv6 address to an interface, with a default route towards the server. Is it possible without enabling "ipv6 unicast-routing" on client side.

I have Cisco 2900 routers running IOS 15.1.  I have a pair of routers with a serial interface into an MPLS network (T1)...LAN1 - R1 - MPLSWAN - R2 - LAN2Here is the existing QoS config:interface Serial0/0/0 bandwidth 1536 max-reserved-bandwidth 100 s...

Hi at all!I have a Cisco 876 Router, wich is connected to the internet via a second LTE Router on VLAN2. Routing and NAT works fine there for internet access. No i would like to use VPDN DialUP via pptp to my workplace. The connection is up and runni...

Hello all,I have a weird issue.  We had an issue last night that wrecked havoc on our network that mainly affected our workstations.  Apparently, an MBAM definition file quarantined a certain DLL file that caused our PCs to crash.  I don't see how th...