Routing

Hi Experts,We had an ASA in our environment and tried to migrate to new ISP. But after the migration of the ISP, internet well as vpn disconnects in 20 - 30 minutes.Following are the noticable things after the internet disconnets1) Ping to the ASA's ...

Hi,i am having hard time connecting RDP to a machine.Scenario is from Home user connect easy VPN (built on VPN concentrator) after VPN then can RDP company servers in Data Center "A"  fine.Problem accurs when they need to access a 3rd party "B" serve...

Hello,i have  a problem with my 4400 router. i have a fixed ip of my provider and the router gets this from my cable modem.But when i try to ping the ip addrress from provider i have no reply.I need this for a vpn connection .Can anyone help?

We have 2 MB line terminated in 1921 Router.Two customers are connected to Gigabit ethernet 0 and Gigabit ethernet 1.  2MB has to be devided among these customers, 1M etch.Also need to give whole 2 M to one customer if other is not using their bandwi...

Hi,I have one questions regarding if C6509 suports "ip tcp path-mtu-discovery" ?Does anyone have experienced to apply this command to GRE interface on C6509?if yes, let me know what is the the IOS for that.Thanks you.

I have a 2951 which i want to intergate to the CUCM and wish to plug a Siemans ISDX into it which is the best card to use NM-HDV2-1T1/E1 or  WIC2-2MFT-T1/E1? its QSIG

I've setup and configured the following local monitor session on a 7606 but it doesnt seem to be outputing anything.  Any guess as to why, or what I might be doing wrong?  Gi1/1 is doing ~40Mb/s egress & 15Mb/s ingress.  Both source and destination p...

buenos diasquisiera solicitar ayuda ya que estoy configurando una interfaz en modo trunk y el comando lo puedo aplicar sin problemas pero no se ve reflejado en la configuración de la interfaz la que sigue en modo access.gracias

.

Hi Guys,               I have a peculiar isse, when I try to configure the controller dsl interface on 878, it starts restarting, it is actually running the latest IOS , any advice would be helpful, here's the output.Router(config-controller)#mode at...

I have one cisco 2811 router.One cisco 4503 core switch.And one cyberoam UTM.VLAN 16 on router connected to VLAN 16 of core switch.VLAN 3 on router Connected to UTM.VLAN 2 on router connected with Internet Leased line.And one MPLS VPN terminated at F...

Hi guys,I'm having some issues with classifying video conference traffic for QoS on our WAN link.This is the config i'm using: (partial)class-map match-any VIDEO match protocol rtp video policy-map QoS-Policy class VIDEO    bandwidth 1024  set ip dsc...

This weekend I have been working on new Cisco switches for our new office. Last night a series of storms came through our state and a a result power to our current office was lost for a few minutes. I was in the process of downloading the latest Flas...