Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Basic Question EIGRP

Hi,I have this configuration in a 3750:interface gi 0/1 ip add exitinterface gi 0/2 ip add exitinterface gi 0/3 ip add SHUTDOWN exitrouter eigrp 100 network

Cisco 876 - CPU load

Hi,I just connected a 876 router to a VDSL modem (50mbits down / 10 mbits up).I noticed the download upload rate was not even half of what should be possible.So I called the ISP but then realized I should check the router cpu history first.As soon as...


Hi,  I have Cisco router 1921 with VWIC2-2MFT T1/E1, and I got WAN connection 3M ATM IMA. Is VWIC2 card will work? If yes how I configure it and if no what card should I buy?  Thanks in advance!  Mike

2811 trouble programming new WIC-1DSU-T1-V2

Hey 2811 Gurus,I have a 2811 runnung IOS Version 12.4(24)T2  with VWIC2 2MFT-T1/E1 in Slots 0 and Slot1 and am trying to add a WIC-1DSU-T1-V2 in slot 2. The Card shows up in the inventory as:WAN Interface Card - DSU/CSU T1 Fractional (V2) on Slot 0 S...

fgoodwin by Beginner
  • 1 replies
  • 0 Helpful votes

IOS upgrade on Nexus7018

Hi all,I am trying to upgrade IOS on my Nexus7018 from version 5.12 to 5.13. I have managed on all my three out of four Nexus succesfully but one of them is keep coming with this error,""""N1K-7018-1# install all kickstart bootflash:n7000-s1-kickstar...

Resolved! Online Insertion and Removal on 3845 and 2821

Hi all,I've got a 3845 and a 2821 and I need to add another WAN interface card on each router and wonder if this can be done live while the router is running. Has anyone done this before ?Thanks in advance !!D.

dtran by Frequent Contributor
  • 2 replies
  • 0 Helpful votes

Traffic drops when BGP reconverges

Hello,I have a question as to why I would see packet loss when BGP comes back up.We have 2 ASR1006's both running full tables of BGP to the same upstream ISP. We load balance the 2 links to them. the ASR's have an OSPF connection between them.When on...

mike by Beginner
  • 1 replies
  • 0 Helpful votes

2911 Router - WIC

I purchased a 2911 months ago to connect a remote site via T1 circuit.I think I might be missing some hardware to make this work on the remote end. Currently have a VWIC2-2MFT-T1/E1 card.Does this WIC actually work with this router? So no reference t...

IP SLA on Catalyst switches

Hello All, I have some issue with IP SLA. Here is the configuration of IP SLA : ip sla responderip sla logging trapsip sla 11 udp-jitter 5000 tos 160tag jitter_10.177.0.50ip sla 12 udp-jitter 5000 tos 160tag pathEcho_10.177.0....

jgeralsky by Beginner
  • 3 replies
  • 0 Helpful votes

3825 Router & VWIC-2MFT-T1

I am trying to get this WIC (VWIC-2MFT-T1) to work in our 3825 Router.  I can see the WIC when I do a 'show diag':WIC Slot 1:        T1 (2 port) Multi-Flex Trunk WAN daughter card        Hardware revision 1.0           Board revision B0        Serial...

redphone by Beginner
  • 6 replies
  • 0 Helpful votes

Cisco 876 - WAN failover

Hi,One of my branch offices is connected to an ADSL line as well as a VDSL line.Since I really don't need the ADSL line I came up with the idea to use it as a backup line.So I searched google and found this nice little article