when i open external domain in my company can't work..but,i open external domain in my home it is work.please look at my diagram attach file.thank you.
I just got my first 3945 router and E3/T3 Network cards and when I do a sho ver I can see the E3/T3 card but when I do a show run all I see are the 3 GE interfaces. How can I make this active?
I am running multicast on MPLS and the video content is getting freezed can any one let me knw the reasons.No ping drops observed on the Link , router supports multicast very well !!! Its a 2Mb Link on Radio frequency Awaiting for your responses pls
Hi,I was wondering if I could use the CISCO3945 Integrated Gigabit Ethernet WAN ports for routing, I need to enable BGP and I was willing to use one of those ports.Any help is much appreciated.
Hello,The Cisco 2911's have aggregate 1.6 Gbps towards route processor - I am trying the same specs for Cisco 3845 router? from http://www.cisco.com/en/US/prod/collateral/routers/ps10537/data_sheet_c78_553896.htmlThe EHWIC slot provides enhancements...
Team,Here is my situation. ANy help will be greatly appreciatedVoice recording servers: Witness (2) (Supports SPAN)CUCM - 8.XSIP gateways - Cisco 2900'sSites : 2Current situations:Currently, the client voice recording system supports SPAN. Currently...
So I have been asked to make the following scenario work:We have 2 Cisco 1721 routers that need a site to site link between them. One will live on a corporate network with the following setup. It will only have one interface active at an internal i...
Is there any suggested upper limit to a single EIGRP hub-and-spoke design (i.e. with a single central router)?Router is a 2900 ISRI'm vaguely aware of a similar design limitation with OSPF areas where no single area should contain more than 40 - 80 r...
Hi all,We have a basic 4 site WAN. Our WAN links are all 1GB.We run EIGRP between each site, and within each site.We are moving our infrastructure model which will mean quite a lot of applications will be remote, located accross the WAN. As such, t...
Dear all,I want to add distribute-list 1 out in R7, so that R8 and R9 can't learn R6's loopback address. Howerver, once I type distribute-list 1out fastEthernet 0/1 and enter. It it not work. Any one know is it distribute-list out can not be used in...
What is the latest Sup engine ? is it sup 720 What is the role of supervisor engine ? Can any one explain me the exact differnce between , MSFC card, DFC card, and PFC card?Thanks,AJAY
I have no practical knowledge of BGP but I would like to know if the following will work.I have a network with two data centre, each with a 10Meg internet conneciton from a different provider at each site.Site A has a public address spaceSite B has a...
I sat in a great Enterprise QoS breakout session during CiscoLive this year regarding standards updates and recommendations for QoS policies facing SP-managed L3 VPN's. During that session, I noticed that the recommended settings for all of the CBWF...
Dear all,I have an issue. We have been told by our tutor, to find a solution for a scenario and i have been cracking my head.I have a Cisco Asa firewall (5505). I normally connect to a remote entity using IPSEC VPN. Now, the scenario is, the client (...
