Routing

Hi All,I received a new HWIC and installed it.  Unfortunately it is not recognized by the router. This is the error message in Syslog:*Sep 17 21:07:02.175: %GT96K_FEWAN-1-UNKNOWN_WIC: slot 0, wic card has an unknown id 53BHere is the ‘sh ver’ command...

a quick question, is there such a thing as router synchronous report?thank you,Kevin

I am studying for the CCNA and I came across this question in the CCNA ICND2 Second Edition of the Wendell Odom book.I am thinking that the answer to the question would be A and C because it would use the local DLCI. the answer is at the bottom. Can ...

Hello All,Is ther any way that i can confim which subnets are allocated to New Zealand by IANA or APNIC?RegardsJagdev

We use Nagios to monitor our 4  core routers. 2 of which are our main BGP routers.  We use Nagios to  monitor these devices.  Periodically we get an alarm in nagios stating  its not-responding and within a few minutes another alert clearing the  prev...

I have an 827 (I know its old)  I have everything working from the router its self, I can ping out to ip and to domain names everything works it get the ip and dns dynamicly from the isp (verizon.)However the interfaces do not get the dns server info...

Hey, need some help with this config. I installed one Cisco 2800 a week ago. The router works fine, saving that each 10 or 12 hours the PAT simply stops working, leaving me no more choice that restart. The NAT works fine, internet is ok. The problem ...

Hi, I’m working with a L3 Core Switch with 4 VLAN´s and 4 sub networks(10 network). I’m using only 10.0.0.0/8 network in all LAN and 172.16.X.X in all WAN. I have a WAN VLAN (VLAN1, Core–router) with 10.10.10.1/29 sub network. I need to put into rout...

I am having problem with one of my SPA-2X1GE cards in cisco 7606 router.There are two SPA-2X1GE in my router and one is not coming up.Previously it was having the IOS Image:c7600rsp72043-advipservices-mz.122-33.SRD3.binbut now we upgraded a new IOS s...

when I insert an SFP in my 12000 GSR line cards SPA modules , the show inventory shows the following output for some of the ports :NAME: "slot 3", DESCR: "ISE 10G Modular Services Card v2"PID: 12000-SIP-601     , VID: V07, SN: SAL1335XNUFNAME: "SPA s...

I have made configuration for 2 ISP.Unfortunately NAT do not want to switch automatically from inactive to active route. Any suggestions: My config:!interface  FastEthernet0!interface  FastEthernet1!interface  FastEthernet2!interface  FastEthernet3de...

Can someone tell me if the WIC-2T Serial WAN Interfacs card passes RIPv2?Much appreciatedFrank