Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Webinar

 
Labels

Forum Posts

Hi all,I recently move sites to a VPLS provider.I setup all routers to run EIGRP. This company have a particular setup between HQ and DR sites (Disaster & Recovery)Please see attached.The problem resides when I enable EIGRP in the inside interface in...

Dear All,I have another scenario as shown below for achieving automated failover on my WAN links.Here I am having ISP cloud as a primary link and when ever that fails I need to go over ISDN link which acting as a backup.I am using basic static routes...

Hello, I am stumped on how to configure a network to be able to accept traffic from two ISP's to one host.We have two ISPs, connected to two firewalls, each firewall has a static NAT mapping for the external IP to an internal IPISP1 --> FW1 NAT exter...

t.khan by Level 1
  • 2509 Views
  • 12 replies
  • 0 Helpful votes

Hello All,I have a requirement of connecting 21 serial interface to a Cisco Router. How can I acheive this?Basically, We have 21 Satellite modems which has serial interface at LAN side. I want to connect them to a single router. Can i connect 6 numbe...

I have an ASA 5505 v7.2(2)Can someone please clarify this for me.Setting: static (inside,outside) XXX.XXX.XXX.XXX 192.168.16.3 netmask 255.255.255.255Result: Cisco VPN Client can connect and smtp traffic does not pass                              Set...

mike by Level 1
  • 3986 Views
  • 10 replies
  • 0 Helpful votes

Hi All,Before asking question let me put here what I understood.[ iBGP peers should not advertise routes learned from iBGP peers to other iBGP peers( as per BGP rules, which is there because AS-Path attribute functionality will be defeated..so this r...

gsumsonIE by Level 1
  • 991 Views
  • 4 replies
  • 0 Helpful votes

Hi All,I'm working on a practice lab at the moment and trying to understand BGP and default routes in a network. I've attached diagram with a bit of information. From my reading I understand that you shouldn't redistribute BGP into and IGP such as EI...

conmurph by Cisco Employee
  • 2260 Views
  • 5 replies
  • 0 Helpful votes

Hello,I would like to reduce the number of default routes on all of the routers on our corporate network which is around 60 sites.  The routing tables are too big and i am running OSPF.  Is it possible to create stub routers on the routers that are o...

ohareka70 by Level 3
  • 1719 Views
  • 5 replies
  • 0 Helpful votes

Hello Folks,Customer's got a problem.He can't configure "protocol pppoe" on his 2921 in a VDPN group.vpdn-group testaccept-dialinprotocol x <---- only l2tp or pptp are available, but no pppoeI've searched the whole internet for a reason/solution but ...