Routing

Hello Netpro,We are terminating multiple Internet Links on a dedicated 2960 switch not connected to our LAN.we need to monitor the link utilization using SNMP.Question : how can i connect this switch to LAN without compromising securityThanksNasr

Hi All,I have some questions1) how many Routers does OSPF & EIGRP supports. is there any  default/recommendation2) how does OSPF count Metric?3) hows does DDNS works?Many Thanks in Advance

one of my custoemr have a setup like the one in attachement.He want 2 WAN ip address to be allocated to his primary and standby firewall and additional 2-3 IP address for his servers.IF i provide him /29 address will he able to meet his requirement.....

Hi Friends,Please refer a network setup attached.I want to have 2 Public IP address for firewall ,1 for active and 1 for standby and 3 to 4 Public IP address for my servers , if my Service provider gives me a /29 address block , will that meet my req...

My 1841 router is loaded with IOS (C1841-IPBASE-M), Version 12.4(1c) and the Flash size is 32Mb. According to our ISP technical support the router cannot be configured for BGP session because the IOS version does not support it. What version is just ...

Hello,I was reading in one of my training manuals that if the average queue size is above the MaxThreshold but less then the total queue size packets will get dropped with MarkPrabobiltity and if the average queue size is above the max threshold and ...

I've got a handful of new 891 remote office routers that I've configured toconnect via two concurrent GRE/IPSec tunnels back to two different home offices.One home office provides data for the PCs, and the second home office provides voice for Cisco ...

I have an MPLS connection to a client and we are running OSPF over the MPLS connection. My client swears up and down that they are advertising a particular network but it does not appear in my OSPF database on my ASA 5510.  I am receiving several oth...

Currently having a problem with part of the router config disappearing after a power failure.  And yes, I did do a copy running-config to startup-config prior to the power failure.  I have had this happen on three of our sites so far.  The part of th...

Dear Sirs/Madams, Pls kindly find the attached file and let me know what is difference between PWR-2700-DC and 2700W-DC/6 (row 7 and 9). I didn’t found the cisco document to clear this. I need info for sent to customer, whom think two power included ...