Routing

My boss has asked me to find a replacement Cisco Switch,We are currently using a SMC tigerswitch smc6128pl2 What would be the approprate replacement for this switch in a cisco model?  Any suggestions would be greatly appreciated.many thanks in advanc...

Hi I have a system that involves two devices plugged into a cisco asa 5540 firewall.  A program on the device on the inside sends traffic to the device on the outside at a specific ip address 192.168.11.11 for instance.  Is there a way that I can red...

Hi ,         How to enable the webconsole on L2 & L3 switches . Kindly advice.Please find the attached file. We need to enable all the switches link this.Note : We have already enabled HTTP and HTTPS.Thanks in advanceRegardsGopinath.L

Hello All,I am not sure if this is the right place to ask this question but please directly me to the right place in case I am wrong asking it here.I need an ATM switch for my home lab in preparation for Service Provider CCIE. I am aware that LS1010 ...

Hi,When doing 2610xm router IOS update, it gives error message of software forced crash. (please see atached file for detail error)I can't log back in the router.Please help.ThanksDengming

Hi,Does anyone know what the applicability for this feature is, enabled using the "ip nat allow-static-host" command. The docs state that it is used to support users configured with a static IP address. It does not say much beyond that ?Thanks,Pare...

I have a 3825 running c3825-advipservicesk9-mz.124-13b.bin. I have multiple VRFs defined on it. Is there a way to ssh from the router to a host inside a VRF similar to:telnet 192.168.1.5 /vrf word

Hello NetproInternet Service Provider allocated 8MB Bandwidth now I need to distribute the Bandwidth in 3 departmentDept1->> 4MBDept2->> 3.5MBDept3-->> 0.5MBISP Wimax Ethernet cable connects to cisco 2960How do I configure the switch to restrict Dept...

Hi Rick / GP,Help me with this post. Time to time I get into issues with PBR.Attached is config and diagram for HQ and Branch8PBR Config I tested is after ---- linesAll VPN between HQ and Branches are over Internet and not private lines.All Branches ...

Hello everybodyIm using Cisco router as Tcp to X.25 translator. In Tcp to X.25 conversion during X.25 call setupCisco router acts as a XPAD device and send call request along with CUD 0X01000000 whichshows source device (Cisco Router) is a PAD device...

WEB Servers | Firewall (Customer Z VRF)10.20.20.1 | | 10.10.10.1 | | Switch / \ / \(20.2) A B (10.2) | \ / | ...

Hi,what is a best references for EIGRP that explain EIGRP in more detail. BR,Auos.

Hi ThereI am trying to set up one of my cisco routers to NAT  to my mail server but my client con not connect and I cant see what i'm missing. Any help appreciated. Here is my config:-service timestamps debug uptimeservice timestamps log uptimeservic...