Routing

Hello,Is there any limitation on sale or life or maintenance for cisco Enhanced 1280Gbps Fabric? thanks,Osali

Hi All,I'm fighting my ASA 5505 for a couple of days now, but I can't get it work for me the way it should....Situation:SDSL Routed Subnet Internet ConnectionIP: x.x.x.83/29I setup my Outside port (port '0') with IP x.x.x.84/29Cisco IP: 192.168.1.55 ...

has anyone done PBR using either DNS or HTTP operations?

I came across a CEM port whose Dejitter buffer size is set to 60 and the Dejitter buffer level max was 64....How is that possible?

I have a Cisco router connected to an Internet T1 and an Internet DSL line, NATting to each connection and sending certain traffic through each connection via route-maps. If the T1 or DSL is unplugged from the router, all of the traffic "fails over"...

Hi all,I have a Problem with a ATM service Dropping large Packets, If I ping with a packet size of 500 it goes fine. And if I use 1400 it drops 60% of the packets.Can anyone see any obvious Problem in the show command below?--------------------------...

What could be a problem of installing an IOS image on a 32MB Flash memory if the minimum recommended is 64MB Flash memory? The IOS image is about 22MB, so it could be downloaded in the 32MB memory.

Good day .Our topology is : ----1841----ISP1 |ASA5510--- | ----1841----ISP2We use EIGRP for routes redistribution.Both 1841 has static nat rules for our inside services. When outside client is trying to connect to on...

HiQuestion is my client is doing copy paste from US site location to asia site location the BW was upgraded from 3mbps to 20 mbps but when customer initiates file copy paste he wants to see the throughtput at 20mbps since he is paying for it but only...

Hi has anybody an idea if its possible to connect 2 sites, each with a pair of routers with 2 serial PPP-Links, each connected on one seperate router, and building a multilink bundle across two routers.I know about a dail-feature mulitlink-multichass...

I am trying to find if Client Matter Code option is available in Call Manager Express

All,I need a couple of tricks if you have any. I have a radius server that authenticates logins for our routers. Over the weekend, I sent a new router to a branch. I can log into the router and get the ">" prompt, but when I try to do enable I get "%...

All,Need to find a command on the router to define a static NOT to use a specific interface while it can use any other interfaces.Thanks,

I have attached the confg from my 1841 router. Previously had 1 WAN connection on FA0/1. I have added a WIC-1ADSL module and believe it to be up & running as Dialer0.Now what I would like to do is take all Citrix traffic (port 1494) and route it in...

I have 10Mbps of IP transit (Internet) through my provider, my PRTG graph shows utilization of 10Mbps but the through put is low, if I try to download from FTP servers that hang off the provider I get less than 690KByte/sec. I don't know what to do, ...