Routing

In site A, I have a cisco 3845 with a two T1 (WAN) betwe is the show intAttached are the end point show interface and sh queue.On the Mpls site the is just massive latency , packet drop, how can I fix thies problem, could it be a telco problem?

I have cisco 2821. I want to change the IOS for my testing purposes. I have download the IOS but unable to to load the IOS.I am getting sometimes permission error and sometimes no sufficient place.it is not giving me the option that delete the old IO...

Hello All, In an attempt to install a 3640 series i encountered the following which hampered the installation, any help how how to go about it?.Do not start the sending program yet... File size Checksum File name 3203147...

My ISP Provider say's that he is providing 2MB Speed how cvan i verify that he is providing.is ther any command which can be used in the ISP router

hi experti want to configure inter vlan configure in 3550 switch.i had configure but not working could you guide me to configure it

Hi , I have had a 1720 for some years routing to 2 networks ( one lan 192.168.1.x , one DMZ 203.53.178.x) via 2 ethernet interfaces .we got an 857 as part of an ADLS 2 upgrade but i don't know who to set up the routing on the fast ethernet ports.is t...

1760 Router - 2960 CatalystI'm running multiple VLAN's - I'm able to pull DHCP on native vlan - but nothing else. Routerip dhcp pool 1 network 192.168.74.0 255.255.255.0 dns-server 10.132.80.5 10.132.80.6 netbios-name-server 10.132.80.5 10.132....

hi guys,There's something in Cisco's BSCI Exam guide, 4th Ed, on page 350 (Example 2).Routers B, C and D are supposed to see both RIP and EIGRP routes, right? On page 352, the configuration 's output shows that we redistribute EIGRP into RIP.I don't ...

i inherited a network that is redistributing routes from BGP to EIGRP and back again. I get a queasy feeling everytime I make a routing change. I want to clean it up (and make the table smaller) by announcing summarized routes via BGP to remote sit...

I can telnet to the roouter from any port on the router , but I can't telnet to the loopback.. yes there is user and password . but its the same as for other ports , any help pls

Hi,Is it 3845 router supports 100 meg internet pipe.Thanks,Mahesh.

Hi,I just have an inquiry regarding the capabilities of these routers. We are planning to use our existing routers for voice. Currently, we have plenty of 3725 routers with NM-1A-T3 each. We would like to know if this can also handle NM=HDV network m...

3725 with 12.3(7)T and VWIC-2MFT-T1. Two T1 lines set up in multilink ppp configuration to aggregate bandwidth. Controller T1 0/0 set up with channel-group 0 and controller T1 0/1 set up with channel-group 1. I am confused about channel-group config ...

HelloWe have a problem with our ospf configuration.We have two area :area 0 is the wan areaR2 - R1 is the major tunnel linkR1 - R3 is an adsl spare tunnel linkarea 1 is the local area R2 R3 R4 are on the same local network.Other lan network are behin...