Hi,I have a cisco 1720 - C1700-NO3SY7-M), Version 12.2(8)T10 - in which Ethernet port I have a wireless Ethernet connection to get a server in a remote site.The problem is that I have to do "clear arp" in the router sometimes because the server canno...
Hi,I have 2 routers A and B as Eigrp neighbour.Eigrp neighbour ship has esteblished. Now under EIGRP I have advertise one subnet as below ,but it is not getting adverising on router B. Please advise.RouterA#router eigrp 100network 172.22.9.0 0.0.0.25...
Hi Friends,Just a basic query, which i would like to get it clarified.Q1. Why is EIGRP called Distance Vector?My guess :- Though EIGRP does not use metric as the hop count, it uses delay (and BW)) and delay is the sum of the delay of all the hops to ...
Hi everyone,I am currently studying for QOS 642-642 exam and I have a problem with the untrusted boundary. I have 2 sets of 2950G-12-EI in my lab running on IOS 12.1(22)EA12. As per Wendel Odom exam certification guide and 2950 Software configuration...
When i try to install a 2nd FESMIC on a 3270 stack, I get a message that says the IOS supports only one FESMIC card. using c3270-adventerprisek9-mz.124-20.T.bin. Is there a version that supports multiple FESMIC's or plans to support multiple?
Dear sir, Iam confusing the switch which model is suitable. 1)managed switch with 22 10/100 ports and 2 dual-personality ports for 10/100/1000 connectivity or optional fiber uplinks. 2)Layer 2, 48-port 10/100 switch with 2 dual-personality Gigabit po...
I limit my customers on 6504E using rate-limiting but the customers shoot beyond the rate-limit.I configure rate-limiting on Cisco 6504E with the following cards:IOS:s72033-advipservicesk9_wan mz.122-18.SXF8.binCardsSupervisor Engine 720 (Active) ...
Dear All,we have the following scenario1 core router with dual internet link. We dont want to run BGP. Can we use or load share using two default routes? I tried but the routes worked one at a time.We have also created two vlans for LAN segregation a...
We recently install a new clear channel DS3 and have installed an NM-1T# card and everything seems to be okay but I have noticed that some of our ping response times have increased. I have been looking at the dsu bandwidth on some of the sub-interac...
Hi guys,I am in the process of setting up a cisco 1801 router for an ADSL 2+ connection. As this isn't something i've done before, i have a few questions:1. My internet connection is uses PPPoE. The 1801 Data sheet says the router supports PPPoA. Can...
I have installed a NM-4B-S/T= 4 Port BRI interface and am trying to configure 4 voice ports on the 2811 SRST router. The ios will not allow me to define the voice ports.The interfaces show as Bri1/0, bri1/1, bri1/2 and bri1/3.How do I get the 2811 to...
1. Is it possible to use a firewall (netscreen, PIX) as an edge device connecting a network to the internet2. Is it recommended to use these devices as edge devices, or is it recommended to use a router as the edge device and have these devices loc...
