Routing

Hi Fellow Networkers,I am bundling two E1 lines in a PPP multilink bundle. need to check the command reuqired to configure on multilink interface so that if any E1 goes down, bundle shld go down.I am trying to shut a interface manually but ppp is jus...

Please I have two link through diff ISP connecting me to the head office, I want to configure load balancing, so traffic can take the two link and the same time a fail over, how do i go abour it...2. Also i have another branch with EIGRP running. I h...

Is there any possible to apply policing and shaping to vlan interface?

Dear alli have 2 offices, from office A i have 2 point to point leased lines(128kbps each)connecting to office B. office A ------------------- Office B 192.168.1.0/24 ------------------ 192.168.3.0/24i have not bundled ...

How important is it to have a routed connection between 2 switches in a routed server farm access layer?So, what we have are 2 server farm switches in an HA configuration with L3 uplinks from each to a routed distribution layer, as well as L2 trunks ...

hi, I have 3845 in my network connected to internet, i want to block all peer-to-peer application like KAZA etc . Please help me in configuring NBAR to block all types of torrent applications.Thanks

I have a E1 card on a 3660 router. It show reset. I've tried to troubleshoot with SP in vain. Anone with an idea where else to look?

I am connecting a Cisco 2560 switch into Cisco 2500 router. My questions are: Will this work? If so, with what tools can utilize the full capability of the switch or the router?

I have a Cisco 3825 router running 12.3(11r)T1It originally had a single 4ESW switch module inserted into it. The customer likes each VLAN to have its own interface for routing. The customer currently has 4 VLANs and required the addition of another ...

I have a remote site with a VWIC2-2MFT-T1/E1 Module in a Cisco 2811 router. They are trying to configure a PRI group underneath the controller interface. However the command is not being accepted. Customer has added the ISDN switch type statement (is...

Hi,I hvae an AS that comprises of 16 x /24s.This peering is being done on a 3640.Currently i'm only advertising/peering 8 of theses 16 like so:interface FastEthernet0/0.3 encapsulation dot1Q 230 ip address 216.24.231.1 255.255.255.0 secondary ip addr...

Hello all,I'm currently working at a site with a T1 connection between their main HQ, and remote sites. We are upgrading the existing T1, to a DS3 line, and I've run into a few questions. I've never turned up a DS3 before, so I'm wondering what typ...

I have a 877W router connected to a ISP that offers ADSL2+ connectivity with 20Mb downstream and 1024 upstream. The "sh dsl" command show a 19200 DS and 970 US sync data. The only basic things that I get configured on the router are:- 2 or 3 static P...

What QOS can I use if I want to set (e.g. voice has highest priority to process, web is lowest priority to process)

Hi Folks, hope I'm posting in the right group.Has anyone port-channeled two 10G links across separate line cards in a 7609? I want to create a 20G port-channel between two 7609's but each 10G port on a separate line card (6704). Anyone experience any...