Routing

Please help,I configured two 876 routers for DSL and ISDN backup connections between two sites.I first configured ISDN and checked the connectivity and everything worked.I then congigured VPN (IPSec tunnel) and also the firewall and i get the followi...

Hi Sir,My router config as follows:!interface FastEthernet0/0 ip address 10.1.0.1 255.255.0.0!interface FastEthernet0/1 ip address 10.2.0.1 255.255.0.0!router eigrp 100 network 10.0.0.0 auto-summary!The router is performing auto-summarization. Let's ...

what command to know the IOS images on a router? how can get one?is it available on cisco site? thanks

Multi-exit Discriminator (MED):I know MEDs are propagated between autonomous systems and not propagated into a third autonomous system.My question is: Are MEDs also propagated within the same autnomous system?

Hello everyone,I have an example here.Theres a router which has 2 serial connections configured and an ethernet connection. The Ethernet goes to a catalyst 4507 on the LAN. One of the serial connections is s0(192.168.99.10) and the second being s1(...

Hello!1)if i use a default route along with EIGRP;IS The Default route win over EIGRP?2)does The Default route in this case Acts as a Back up route if EIGRP Fail?10XS For ur Valuable Info

Hi all, I have a need to apply QOS for Voip in my SOHO network. the spokes are 871's with DMVPN set up to 3845 NHS's. we have GRE tunnels between each site and need to provide some sort of QOS to support the VOIP traffic. Most of the documentation ou...

We're setting up a connection for our aircards between us and Alltel. Our aircards will be assigned a static ip address (166.211.213.64/26) and will be routed from the Alltel network straight to us via a T1 line. I can ping the Alltel end of the T1(7...

Hi,I have a Cisco 7507 chassis with two RSP4+ processors, equipped with 1 VIP4-50. The 7507 is running 12.3(15)feature set IP PLUS IPSEC 3DES. I want to upgrade to 12.3(18) with the same feature set. The new image has been already installed on disk0...

Hi,I need a template that I can use to configure ISDN backup on a 1700,2600 and 2800 router.These routers are based at client sites and I need them to dial into one of my Routers.Any help is appreciated.Thanks

My client only gave this info. Will this work???Will the following work for a customer who wants to multilink 2 T1's together for greater Internet access?CISCO1841-T1 1841 bundle w/WIC-1DSU-T1-V2, IP Base, 32FL/128DR 1 CAB-AC Power Cord,110V 1 WIC-1...

Please good guys, i need you to help me out once more. There are two Cisco PIX firewall devices we have been using, and one is serving as live, and the other as failover.There is a need to use the failover as a live or production firewall somewhere e...

Can anybody tell me about Source based routing and Destination based routing with scenario.