Routing

I'm trying to understand PBR. I read the white paper about PBR on Cisco's site, but no example of the commands. TIADavid

Hi,Is there a command within router IOS to find out the number of memory chips being installed in 3640 memory banks? also what density are they (ie.. 32/62mb)?Thanks,

HI Experts!I Have Project to design & implement an IP addressing scheme.could u give a usefull link regarding this matter or some case study to begin with it.10xs

hi alli am not able to connect PIXcan any body help with the configuratio The PIX is on Default configuration.

Hi, We have a 7206 router being utilized for VoIP setup.Since 2 days we have been observing high CPU utilization on this router.We have enabled CEF which has brought down the util to 50%.Can any body guide me if there are any other ways to cut down t...

Hi everybody,I have an internet router, 2650 XM running 12.3. We have a d3 pipe to the internet, yet the serial interface is configured with:service-module t1 timeslots 1-24.I guess I was expecting that to have d2 in place of t1. What would be the co...

HI all,We are having a very strange behaviour on a 7304 router, CPU over 45%, line users impossible to clear, etc. The thing is that we are constantly changing the config of the PVCs, I mean, class-vc from 4MB to 2MB, then to 512KB... creating, dele...

I've been the systems administrator here Since May. I'm hoping someone can help me as I often have a lot on my plate and cantg devote the time to learn cisco as much as Id like. Background: We have 2 ds3 connections (44Mbps) each coming into our ro...

Hi, Router Model: AS5400Card Type: as54-ct3-dfc (Channelized T3 Port)When I tried add channel-group in the T1 number 11. I received the following error "%Insufficient HDLC resources to create channel group". How I can resolve this issue.

Dear Experts,Recently we have added GRE Tunnel to our 7200 router. When pinging the tunnel interface (5000 byte packet ping above) it seems like there are packet drops. Moreover, File transfer trough the tunnel is very slow. I tried Pinging the physi...

Dear experts,one of my customer is having 3660 router it was a main router in thathaving wic12t nm cord.now the problem is router is hanging suddenly ping is getting request timed out and on thattime iam not able to go through console while restat on...

I have a 2801 Router with IOS ver: Cisco IOS Software, 2801 Software (C2801-SPSERVICESK9-M), Version 12.4(3d), RELEASE SOFTWARE (fc3). I want to use a WIC-1SHDSL_V3 but it doesn't work in slots 1, 2 and 3. The led status on card is always off. Is the...

Do any of teh cisco 800 ADSL routers support IPX?

Hi, I have a requirement for one of our services to be offered that Serial and Ethernet Interface should be included under a Single BVI. Essentially this is required to monitor the network as customer does not allow us to touch the CE. In the attac...