Routing

To achieve Internet loadbalance and redundancy, we currently connect to SBC (T1/Frame Relay) and TimeWarner (Cable) for Internet access. Between the edge routers (2600/2500) and our ASA firewall, we position a 3rd router as loadbalancer using CEF, RI...

Can anyone tell me the file structure, for the flash:, nvram: what files go where? i.e ios startup-config and any others I may be missing?

Anybody knows how to translate CTRL+Z and use it within a batch file (i.e. run.bat)?Thank you,

Iam new at this and was reffered here by a friend.We have 2 groups, each with its own network, one with the 172.25.0.0 addr range and the other a 192.68.1.0 add range. We want the users on the 172.25 network to access a particlar server on the 192.1...

One of my techs connected a Cisco 3650 Gig swtich to a 3Com Gig switch I think they may have used a crossover cable. The problem is that I connected a client on the 3560 switch and tried to ping a server on the opposite end the response times were 2 ...

hello,can someone verify this claim? All 2620 routers have 2 WIC slots, and 1 NM slot? All 2610 routers have 1 WIC slot?2610 - 1 WIC slot, 1 FE2611 - 1 WIC slot, 2 FE2620 - 2 WIC slot, 1 FE2621 - 2 WIC slot, 2 FE

I want to force users on a guest vlan so their next hop is our BBSM. I am pretty sure its supposed to go on the guest vlan interface but I am getting some errors policy routing. Or should it go on the Gi uplink to the rest of the network? I have trie...

Dear All,I HAVE cisco 1841.it has 2 interfaces.the first one which is f 0/0 is have public ip from my ISP.the other one is normal, and i am going to give it 192.168.1.100 / 24.now i have 3 subnets totally diffrent .i want to create 3 subinterfaces fr...

Does anyone know of the link that shows all the interface cards that can be used w/ the 7206vxr?

Currently, we have three T1's coming into our building. They connect to our hub (of a hub and spoke topology) Cisco 3600 router via CSU/DSU. We are getting rid of the T1's and we are going with fiber for the three outer facilities. The three fiber...

when i turn on my cisco 805 i get this message:"Configured boot failed, attempting fallback boot."but it works fine after finishing power on sequence.Does anyone know waht it means?Thanks is advanced.

what are the possible WAN connection termination on Pix firewall 515E outside interface.

i have a cisco 877 which i use to connect to internet & main office using IPSec tunnel, my ISP gave me a single static IP with a netmask 255.255.255.255, but the router won't accpet it & i had to use /24 instead, and some people suggested i might cre...

Hi All,I am testing the redundancy using VRRP in a lab environment.I need your help in fixing this issue.This is really basic stuff,guess am missing some configs for the trunk between Switch-1 & Router-1,Switch-1 & Switch-3.Should I use native vlan? ...