Routing

Hi,I have a little oddball of a problem.I'm trying to enable ip cef on a 1720 running 12.05Tbut it doesnt recognize the command from global config.Anybody got any ideas

I configured netflow on 6509 MSFC, but it is showing only broadcast Reason ?ThanksPradeep

Our organization is currently using 144.x.x.x network as our internal ip addressing scheme. internal users connects to the internet via proxy. the proxy's default route is to go internet. internal routes are defined statically. our issue is, if i...

my router's serial interface s0/0 is connected to ISP with 256k duplex. I want to limit the outgoing(browsing)traffic to 32 kb and allow incomimng 256k full in my cisco2611 ruoter.how can I set it? please send config for it.thanks in advance for help...

HiI have 2 2MB leased lines connected via cisco 1841 routers. How do I bundle these 2 lines to make 4MB.Also I want to prioritise traffic such as voice, vpn, web and https passing though the router. i.e I want to give 1MBPS bandwidth to voice, next 5...

I have two offices: Location 1 has all of our employees servers and equipmnent. All computers at location 1 have the following range of ip addresses (10.0.0.xxx). I have an 1841 router at location 1 with fe0 set to 10.0.0.11 and a T1 wic set to 10.1....

Can this module do fractional T3 applications?

hii have a server farm, is it possible to load balance with ios slb on a 3550 switch?if not what kind of switch do i need.?many thanks.

Having problems with the 827 systems from the demo pool, attached is a screen shot of what the router is putting out via the console port attached to my workstation.I tried different cables, tried a different system, tried to "break" the router durin...

This is probably a gap in my understanding but here goes. What is the purpose of the VeryBig, Large and Huge buffers? MTU for ethernet is 15xx bytes so why would I ever need a buffer of 4520 bytes? And if I see a lot of buffer misses in these areas w...

Current scenario: Currently NAT is configured in PIX & no out going restriction. 172.16.16.x network static route entry.Incoming traffic thru ISP2- www, http, https.Outgoing traffic thru ISP2- all traffic allowedIncoming traffic thru ISP1- smtp.N...

Hi all,Just looking at the feature note for this feature at the following url, and I am a bit confused.http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1829/products_feature_guide09186a00802c0816.htmlUnder the section "Dual-AS Configuration:...