I am trying to setup Vlan translation on a ASR 920 but I don't think I have the commands right. What I am trying to accomplish is.. translate vlan 4 to 24translate vlan 7 to 27andencapsulate it all with in vlan 21 via Dot1q So far I have,service inst...
Forum Posts
Hi, Some of you might recognize me from CLN but I am trying to learn to use the right sources for the right purposes. Hopefully someone can link to a document that explains the output of "show ip traffic". Most of it is pretty easy to figure out and ...
Hi!When I was studying the BGP update message, someone says 'Only one route can be advertised in an Update message', but there are several NLRI in an update message capture. Are these two things different? Could someone help me with that, please?
Resolved! Cisco ISR 4461 License
We are trying to input or activate the license for our Cisco ISR 4461 router. It came with IOS XE Gibraltar 16.12.03. We didnt want to use any of the SD-WAN Features so we down graded the IOS to isr4400v2-universalk9.16.09.06.SPA.bin. Now we are havi...
My company's Cisco CGR 2010 routers have been deemed to contain BCSI. Therefore we have to take actions to comply with NERC CIP-011 R2. I am seeking information on what actions may be taken to prevent the unauthorized retrieval of BCSI from these ...
Cisco Novice - I know enough to log in and make simple changes. I am replacing a Domain Controller, primary DNS server. I cant reuse the old IP address. I need to change a few lines in a group policy. svc dns-server primary, svc dns-server second...
Hello, hope you having a good day.I am using SVIs in Layer 3 switch, and using them as gateways for clients. and i am using vrrp for redundancy, but what i am seeing that vrrp messages are reaching clients that are in the same vlan which is useless, ...
Hi,my current situation: I have to implement a clound proxy solution.We have a Cicso ASA 5525.All http and https traffic should be send into a vti tunnel to the cloud provider. (with backup tunnel)The VTI tunnels are up and running.I have added a PBR...
Resolved! ISR C1111 SSH Problem
Hi All,I am configuring my brand new ISR c1111 router functioning as network gateway. I use LTE as the WAN side connection. Upon activation and configuration of the LTE module with SIM inserted, I am able to access to Internet from the LAN side throu...
Resolved! Static routes aren't working
Hello community ! I just passed my networking essential and i'm trying to resolve my previous practical works to mastering routing concept.The plan is:Nancy shouldn't communicate with strasbourg, so i am using an Static routeI configure for now 2 rou...
Hello Bros' I have an internet connection 50mbps shared between endpoint.I need to control these endpoints gateway bandwidth per IP or group of IPs.I have different gears that I will select between them according to the solution applied ...
Dear ExpertsI am doing installation of a NCS 540 for a Teleco part of the installation is loading IOS and Config file (sit specific) using Zero Touch Process (Using Oracle VM Virtual Box and Google chrome)When the process is completed the attached me...
Resolved! HSRP and VSS
Hello I have a scenario where I need the same vlan between two different campus connected by dark fibre. I have pair of 4500-x or 6880-x switches Campus 1 ----------- Campus 2VSS Pair 1 ----L2------VSS Pair 2 | ...
I have router cisco 891F. ISP cable plug into GI8 and dial PPOE via int Dialer1.GI8 received IP from ISP. End users received IP from DHCP. But can not access the Internet. This is my configuration.Please help me to check. I attach my config file.
Hello, I tried looking around, but couldn't find it. On a Cisco router (2911/2951) is there a way to 'drop'/refresh the current DNS cache or just one entry? thanks, Ron
