cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
600
Views
0
Helpful
0
Replies

BFD Hello mode and Demand mode

minh_hieu
Level 1
Level 1

Hi community,

In Cisco, we can support both BFD Hello and demand mode. But I don't know how to configure to select one of this mode. For example, if I want to configure my Cisco router to run in Demand mode, how can I do?

In the document, it only guide to set up bfd interval and multiplier.

bfd interval milliseconds min_rx milliseconds multiplier interval-multiplier

If we show bfd neighbors details, I can see the information about BFD mode. But I don't know if it appears Demand mode:0, does it means our neighbors work in Demand mode?

If

RouterA# show bfd neighbors details


OurAddr       NeighAddr      LD/RD  RH/RS    Holdown(mult)  State     Int

172.16.1.1    172.16.1.3     5/3    1(RH)    150 (3 )       Up   Fa0/1       

Session state is UP and not using echo function.

Local Diag: 0, Demand mode: 0, Poll bit: 0

MinTxInt: 50000, MinRxInt: 50000, Multiplier: 3

Received MinRxInt: 50000, Received Multiplier: 3

Holdown (hits): 150(0), Hello (hits): 50(1364284)

Rx Count: 1351813, Rx Interval (ms) min/max/avg: 28/64/49 last: 4 ms ago

Tx Count: 1364289, Tx Interval (ms) min/max/avg: 40/68/49 last: 32 ms ago

Registered protocols: EIGRP

Uptime: 18:42:45

Last packet: Version: 0            - Diagnostic: 0

             I Hear You bit: 1     - Demand bit: 0

             Poll bit: 0           - Final bit: 0

             Multiplier: 3         - Length: 24

             My Discr.: 3          - Your Discr.: 5

             Min tx interval: 50000    - Min rx interval: 50000

             Min Echo interval: 0


OurAddr       NeighAddr     LD/RD  RH/RS   Holdown(mult)  State     Int

172.16.1.1    172.16.1.2     6/1    Up        0    (3 )   Up        Fa0/1       

Session state is UP and using echo function with 50 ms interval.

Local Diag: 0, Demand mode: 0, Poll bit: 0

MinTxInt: 1000000, MinRxInt: 1000000, Multiplier: 3

Received MinRxInt: 1000000, Received Multiplier: 3

Holdown (hits): 3000(0), Hello (hits): 1000(317)

Rx Count: 305, Rx Interval (ms) min/max/avg: 1/1016/887 last: 448 ms ago

Tx Count: 319, Tx Interval (ms) min/max/avg: 1/1008/880 last: 532 ms ago

Registered protocols: EIGRP

Uptime: 00:04:30

Last packet: Version: 1            - Diagnostic: 0

             State bit: Up         - Demand bit: 0

             Poll bit: 0           - Final bit: 0

             Multiplier: 3         - Length: 24

             My Discr.: 1          - Your Discr.: 6

             Min tx interval: 1000000    - Min rx interval: 1000000

             Min Echo interval: 50000

Thanks and regards,

Hieu


0 Replies 0
Review Cisco Networking products for a $25 gift card