05-17-2008 10:10 AM - edited 03-03-2019 09:59 PM
Hi
Is it possible that same distination reach via diffrent ISP but metric value is same.? and that destination route is install in "Show ip route" table. Please let me known.
-M
05-20-2008 02:31 AM
Hello Harold,
I thought that the usage of the command bgp always-compare-med was enough to achieve the intended result.
From
http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_bgp1.html#wp1011748
To enable the comparison of the Multi Exit Discriminator (MED) for paths from neighbors in different autonomous systems, use the bgp always-compare-med command in router configuration mode. To disallow the comparison, use the no form of this command.
Actually, I haven't tried what I was suggesting.
Thanks for your correction.
Best Regards
Giuseppe
05-20-2008 05:00 AM
Giuseppe,
This command will only force the comparison of MEDs between different ASes. It doesn't mean both paths will be installed if the MEDs are equal.
You absolutely need the hidden command "bgp bestpath as-path multipath-relax" to get the two paths to be installed in the RIB.
Regards,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: