cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
791
Views
0
Helpful
1
Replies

BGP Remotely-Triggered Black Hole (RTBH) Routing

payala
Level 1
Level 1

Hi, 

I hope that someone can help me resolving this issue that I'm having with RTBH, this is my scneario:

R1 ---(RIPv2)--- R3 ---(RIPv2/iBGP)--- R2

R3 --- PC

The PC is making a DDnS to R1 loopback address (150.1.10.1/32)

I want to implement RTBH but I have no idea why is not working, let me share with you the configurations:

R1:
interface Loopback0
ip address 150.1.1.1 255.255.255.255
ipv6 address 2001:150:1:1::1/128
!
interface Loopback1
ip address 150.1.10.1 255.255.255.255
!
interface GigabitEthernet0/0
ip address 136.1.13.1 255.255.255.0
duplex full
speed 1000
media-type gbic
negotiation auto
ipv6 address 2001:136:1:13::1/64
!
router rip
version 2
network 136.1.0.0
network 150.1.0.0
no auto-summary
!

R3:
interface Loopback0
ip address 150.1.3.3 255.255.255.255
ipv6 address 2001:150:1:3::3/128
!
interface Null0
no ip unreachables
!
interface GigabitEthernet0/0
ip address 136.1.13.3 255.255.255.0
duplex full
speed 1000
media-type gbic
negotiation auto
ipv6 address 2001:136:1:13::3/64
!
interface GigabitEthernet1/0
ip address 136.1.23.3 255.255.255.0
negotiation auto
ipv6 address 2001:136:1:23::3/64
!
interface GigabitEthernet2/0
ip address 10.1.0.3 255.255.255.0
negotiation auto
ipv6 address 2001:10:1::3/64
!
router rip
version 2
network 10.0.0.0
network 136.1.0.0
network 150.1.0.0
no auto-summary
!
router bgp 23
no synchronization
bgp log-neighbor-changes
neighbor 150.1.2.2 remote-as 23
neighbor 150.1.2.2 update-source Loopback0
no auto-summary
!
ip route 192.0.2.1 255.255.255.255 Null0
!

R2:
interface Loopback0
ip address 150.1.2.2 255.255.255.255
ipv6 address 2001:150:1:2::2/128
!
interface GigabitEthernet1/0
ip address 136.1.23.2 255.255.255.0
negotiation auto
ipv6 address 2001:136:1:23::2/64
!
router rip
version 2
network 136.1.0.0
network 150.1.0.0
no auto-summary
!
router bgp 23
no synchronization
bgp log-neighbor-changes
redistribute static route-map rbht
neighbor 150.1.3.3 remote-as 23
neighbor 150.1.3.3 update-source Loopback0
neighbor 150.1.3.3 send-community
no auto-summary
!
ip route 150.1.10.1 255.255.255.255 Null0 tag 666
ip route 192.0.2.1 255.255.255.255 Null0
!
route-map rtbh permit 10
match tag 666
set local-preference 200
set origin igp
set community no-export
set ip next-hop 192.0.2.1

Thanks :D

1 Reply 1

chad patterson
Level 1
Level 1

Two things:

 

1. It's because you're not redistributing BGP int RIP.

router rip
redistribute bgp 23 metric 5

 

 

2. You're trying to redistribute iBGP into RIP. You can only distribute eBGP into RIP, unless you use a special override command:

router bgp 23
bgp redistribute-internal

 

 

 

Review Cisco Networking products for a $25 gift card