Greeting
I have setup an eBGP session to a Cisco 2801 CE router. The BGP session establish, however, the session keeps resetting after 90 sec which is the BGP keepalive holdtime value.
Testing:
On the PE router I found that the OutQ doesn't clear = 22 when doing a "sh ip bgp x.x.x.x summary" - Session reset at 1:30
When I filter the amount of routes advertized to the CE neighbor with the "neighbor x.x.x.x prefix-list out" - I see the OutQ clear = 0 and the BGP session remains up.
Number of NRLI advertized without prefix filter = 172
Number of NLRI after filter = 52
I would welcome your suggestions as to why the OutQ doesn't clear.
Regards,
Werner