09-20-2011 12:06 AM - edited 03-04-2019 01:39 PM
Hi All,
I need your help in BGP..
As i am able to ping my IGP networks ,but i am not able to telnet in my routers it shows the
following message.
Destination unreachable; gateway or host down
Do i need to add any command
i can see my networks aswell
Regards
Tash
09-21-2011 03:39 AM
Hi
Here is the routing table.
Gateway of last resort is not set
10.0.0.0/16 is subnetted, 1 subnets
S 10.1.0.0 [1/0] via 192.168.30.1
30.0.0.0/32 is subnetted, 1 subnets
B 30.0.0.1 [20/0] via 172.16.1.2, 00:00:51
40.0.0.0/32 is subnetted, 1 subnets
B 40.0.0.1 [20/0] via 172.16.1.2, 00:00:51
50.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 50.0.0.0/8 is directly connected, Loopback3
L 50.0.0.1/32 is directly connected, Loopback3
172.16.0.0/16 is variably subnetted, 6 subnets, 3 masks
C 172.16.1.0/24 is directly connected, GigabitEthernet0/0
B 172.16.1.0/30 [20/0] via 172.16.1.2, 00:00:51
L 172.16.1.1/32 is directly connected, GigabitEthernet0/0
B 172.16.2.0/30 [20/0] via 172.16.1.2, 00:00:51
B 172.16.8.0/30 [20/0] via 172.16.1.2, 00:00:51
B 172.16.9.0/30 [20/0] via 172.16.1.2, 00:00:51
B 192.168.8.0/24 [20/0] via 172.16.1.2, 00:00:51
192.168.30.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.30.0/24 is directly connected, GigabitEthernet0/1
L 192.168.30.2/32 is directly connected, GigabitEthernet0/1
Regards
tash
09-21-2011 03:51 AM
Hi,
what we need is the routing table of the router which has the directly connected 192.168.8.0 subnet.
Regards.
Alain.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide