cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

75
Views
0
Helpful
0
Replies
Highlighted
Beginner

BGP Transit Peering Issue

We are 2 physically separate Data centres, requirement is to design resilient internet links. 

We have ordered 2 separate internet links with 2 ISPs, both came with their own address ranges, we then registered with RIPE as a result acquired /22 public range.

The objective now is to route all 3 address ranges i-e ISP 1, ISP 2, and our /22 via both ISPs. When I put the request through received following response: We can indeed setup the peering and provide a session over your /22 range, however we cannot assign the prefix list to learn the other networks. Creating the initial peering will allow you test with the single range only. We cannot advertise your ISP 1 range as this belongs to company X and we cannot route this into our network as the range does not belong to us.

Please Advice, as I understand this should be doable ?

Everyone's tags (3)
CreatePlease to create content
Content for Community-Ad
FusionCharts will render here