We are 2 physically separate Data centres, requirement is to design resilient internet links.
We have ordered 2 separate internet links with 2 ISPs, both came with their own address ranges, we then registered with RIPE as a result acquired /22 public range.
The objective now is to route all 3 address ranges i-e ISP 1, ISP 2, and our /22 via both ISPs. When I put the request through received following response: We can indeed setup the peering and provide a session over your /22 range, however we cannot assign the prefix list to learn the other networks. Creating the initial peering will allow you test with the single range only. We cannot advertise your ISP 1 range as this belongs to company X and we cannot route this into our network as the range does not belong to us.
Please Advice, as I understand this should be doable ?
Cisco 2509-RJ freezes during start-up I bought some Cisco 2509-RJ terminal server to work on my labs and was working fine. Today I turned it on and half way through starting up it seems to freeze. I can only find one instance of this happing to ...
Cisco Digital Network Architecture Center Modules(Design Module)Part.2In this article, we are going to talk about the Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and availability to con...
Connectivity Design considerations and recommendation
1.Management Access connectivity
If there is a dedicated OOB management path, consider connecting to CIMC and MGMT port.
If OOB path is not available, Connect the dedicated Management port to LAN Swi...
Cisco Digital Network Architecture Center Modules In this article, we are going to talk about Cisco Digital Network Architecture Center design Module. Cisco DNA Center gives us the flexibility and scalability to configure multiple fabric sites a...