Cisco 7600, ES+ card.
So I have two GigE ports. Ge1/6 and Ge1/7.
Ge1/6 is a port where I have bunch of sub interfaces created each with unique vlan id. For Example below.
interface GigabitEthernet1/6.3119
encapsulation dot1Q 3119
Ge1/7 is a trunk port with allowing mutilpe vlans including vlan 3119.
interface GigabitEthernet1/7
switchport
switchport trunk allowed vlan 600,651,1096,1111,2410,3015,3182,3237,3247,3322,3119
switchport mode trunk
speed nonegotiate
flowcontrol send off
no cdp enable
end
How do I bridge both interfaces together for VLAN 3119 only? I want to create an SVI 3119 and assign an IP on SVI.