cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2507
Views
0
Helpful
4
Replies

c1111 router licensing

nareh84
Level 3
Level 3

hi

 

 

we have got C1111-8PLTELA with ipbase and security license. the firmware which was with the router supported only smart license. because of that we downgraded to c1100-universalk9_ias.16.09.02.SPA.bin. when we check show license, i can see security as permanent but nothing under ipbase. do i have to get PAK for ipbase if i have to get it permanently activated?

 

#show license
Index 1 Feature: appxk9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 2 Feature: securityk9
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 3 Feature: ipbasek9
Index 4 Feature: FoundationSuiteK9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 5 Feature: hseck9
Index 6 Feature: throughput
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 7 Feature: internal_service

 

 

4 Replies 4

balaji.bandi
Hall of Fame
Hall of Fame

The license key for the ipbasek9 package is activated by default. - is this output after upgrade or before upgrade to 16.9.X ?

 

also can you post :

 

show license summary

show license all

show license status

show ver

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hello,

 

--> c1100-universalk9_ias.16.09.02.SPA.bin

 

This translates to release Fuji-16.9.2 ED, for which SmartNET is still mandatory. If you want to use Right-to-use licensing, you need a 16.8 release.

hi

 

 

find the attached output of license commands

 

the firmeware which came with router only supported smart licensing and i think this require dna based licensing? so i have downgraded firmware but i can only see security feature license is permanent but not ipbase

 

Thx

 

 

balaji.bandi
Hall of Fame
Hall of Fame

You should see as below : (but looks something went wrong after upgrade, or something not correct while you doing smart License)

 

Quick to resolve is contact license@cisoc.com they are very quick and get you right

 

------------------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9


1#show license all
License Store: Primary License Storage
StoreIndex: 0 Feature: ipbasek9 Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
StoreIndex: 2 Feature: securityk9 Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card