C1121(X)-8P Out-of-the-box running-config

[Translator]

Hi.

I'm going to build a device with a subject line in the near future, but I'm ordering a device and I don't have it.
I wanted to get the initial running-config, so I posted it.
In particular, I would like to check how the number notation of the physical interface is.
(Is this a notation like GigabitEthernet 0/0/0?)

The following hardware installation guide was viewed for reference.
Cisco 1000 Series Integrated Services Router Hardware Installation Guide
https://www.cisco.com/c/ja_jp/td/docs/routers/access/1100/hardware/installation/guide/b-cisco-1100-series-hig/isr1k-hig-overview.html

[heiliger-eliet]

Hi there!

you con check the link of the fallowing video on YouTube, i can see the phy interfaces have the format Gigaethernet(0/x/y)

X is slot number and Y in the interface number.

https://www.youtube.com/watch?v=pxuS7haLpow&ab_channel=ShambhuNathMishra