cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4106
Views
0
Helpful
3
Replies

C881G-4G-GA-K9 %PLATFORM-4-CELLULAR_MODEM_SKU_MISMATCH

wjoval001
Level 1
Level 1

I have got a 881 router with backup connectivity via 4G.

My 4G stopped working and now I am receiving the errors below.

 

*Jun 24 07:15:05.534: %CISCO800-2-MODEM_UP: Cellular0 modem is now UP
*Jun 24 07:15:25.545: %CELLWAN-4-MODEM_COMM_FAIL: Communication between Modem and IOS failed: link recovery resets modem
*Jun 24 07:15:57.145: %PLATFORM-4-CELLULAR_MODEM_SKU_MISMATCH: Mismatch detected between installed modem Unknown modem on SKU type C881G-4G-GA-K9. Expected modem for this SKU is MC7304
%Remove Dialer Profile Configuration first.

 

Can you provide me the software needed to upgrade the cellular modem.

 

Best Regards,

Wendell

3 Replies 3

Deepak Kumar
VIP Alumni
VIP Alumni

Hi,

Can you share show inventory and Sow version?

Regards,
Deepak Kumar,
Don't forget to vote and accept the solution if this comment will help you!

Hi Deepak,

I was outside the office last 2 day's.

 

Her is the output:

 

Router#sh inv
NAME: "C881G-4G-GA-K9", DESCR: "C881G-4G-GA-K9 chassis, Hw Serial#: FCZ204412NK, Hw Revision: 1.0"
PID: C881G-4G-GA-K9 , VID: V01, SN: FCZ204412NK

NAME: "C881G4G Mother board on Slot 0", DESCR: "C881G4G Mother board"
PID: C881G-4G-GA-K9 , VID: V01, SN: FOC2036ALY9

NAME: "Modem 0 on Cellular0", DESCR: "Sierra Wireless MC7304 4G-GA"
PID: MC7304 , VID: , SN:


Router#sh ver
*Jun 27 08:40:18.585: %PLATFORM-4-CELLULAR_MODEM_SKU_MISMATCH: Mismatch detected between installed modem Unknown modem on SKU type C881G-4G-GA-K9. Expected modem for this SKU is MC7304
Cisco IOS Software, C800 Software (C800-UNIVERSALK9-M), Version 15.5(3)M4a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Thu 06-Oct-16 14:23 by prod_rel_team

ROM: System Bootstrap, Version 15.4(3r)M1, RELEASE SOFTWARE (fc1)

Router uptime is 23 minutes
System returned to ROM by reload at 08:14:42 UTC Thu Jun 27 2019
System image file is "flash:c800-universalk9-mz.SPA.155-3.M4a.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco C881G-4G-GA-K9 (revision 1.0) with 887884K/29619K bytes of memory.
Processor board ID FCZ204412NK
5 FastEthernet interfaces
3 terminal lines
1 Virtual Private Network (VPN) Module
2 Cellular interfaces
DRAM configuration is 32 bits wide
255K bytes of non-volatile configuration memory.
1000944K bytes of ATA System CompactFlash (Read/Write)


License Info:

License UDI:

-------------------------------------------------
Device# PID SN
-------------------------------------------------
*1 C881G-4G-GA-K9 FCZ204412NK

 

License Information for 'c800'
License Level: advipservices Type: Permanent
Next reboot license Level: advipservices


Configuration register is 0x2102

Router#

 

Best Regards,

Wendell

Hello,

 

you might be hitting the bug below. The EEM script mentioned in the workaround would look like this:

 

event manager applet SKU_RELOAD
event syslog pattern "Unknown modem on SKU type C881G-4G-GA-K9"
action 1.0 cli command "enable"
action 2.0 cli command "reload"

 

C881G-4G-GA-K9 4G connection Not getting IP address
CSCuz49252
Description
Symptom:
4g connection drops randomly with error message "%PLATFORM-4-CELLULAR_MODEM_SKU_MISMATCH: Mismatch detected between installed modem Unknown modem on SKU type C881G-4G-GA-K9.

Conditions:
platform C881G-4G-GA-K9
Modem MC7304
Modem Firmware = 5.5.58
Unable to capture dm logs when we loose connection.

Workaround:
Reboot of the route fixes the issue

Further Problem Description:
Creating an EEM script to capture the last 3 dm logs during the time of connection loss.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card