but the responses in that thread are not enough to fix the problem- or even get through tier 2 support at the ISP.
This happens every few hours. It requires a cold reload of the router to repair- there might be another way to updown the interface only that works but not one that I'm aware of. I know this is a strange issue but any answers or ideas on how to diagnose would be great as it is a huge detriment to services. It would be nice if we had more than one choice of cable internet provider in this area.
Here is the sh ver:
Cisco IOS Software, 2801 Software (C2801-IPBASE-M), Version 12.4(6)XE3, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by Cisco Systems, Inc. Compiled Tue 07-Aug-07 21:46 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)
router uptime is 33 minutes System returned to ROM by reload at 09:43:32 EST Sat May 1 2010 System restarted at 09:44:24 EST Sat May 1 2010 System image file is "flash:c2801-ipbase-mz.124-6.XE3.bin"
Cisco 2801 (revision 6.0) with 97280K/33792K bytes of memory. Processor board ID FTX1042Z1MU 2 FastEthernet interfaces 1 Cable Modem interface DRAM configuration is 64 bits wide with parity disabled. 191K bytes of NVRAM. 62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
This also randomly happens:
entry number 8 : LINEPROTO-5-UPDOWN Line protocol on Interface Cable-Modem0/1/0, changed state to down timestamp: 3332 entry number 9 : LINEPROTO-5-UPDOWN Line protocol on Interface Cable-Modem0/1/0, changed state to up timestamp: 3658 entry number 10 : LINEPROTO-5-UPDOWN Line protocol on Interface Cable-Modem0/1/0, changed state to down timestamp: 174449 entry number 11 : LINEPROTO-5-UPDOWN Line protocol on Interface Cable-Modem0/1/0, changed state to up timestamp: 174744
Here is the interface and BVI:
interface Cable-Modem0/1/0 description HIGH-SPEED WAN INTERFACE ip dhcp client hostname router no ip address ip access-group 101 out ip nbar protocol-discovery load-interval 30 traffic-shape group 110 102400 8192 8192 1000 bridge-group 5 !
interface BVI5 ip address 98.190.xxx.xx 255.255.255.224 secondary ip address 98.190.xxx.xx 255.255.255.224 secondary ip address 98.190.xxx.xx 255.255.255.224 ip nat outside !
Inviting all network professionals in operations! We'd like to understand what would be valuable for you in a mobile application. Your response will help Cisco improve a product feature that could benefit you. Thanks!
Click here to take the sur...
Cisco’s software-defined wide area network (SD-WAN) solution allows user to quickly and seamlessly establish an overlay fabric to connect an enterprise’s data centers, branch and campus locations, as well as colocation facilities in order to imp...
1. Log into CLI of DNAC:
ssh maglev@< DNAC appliance IP> -p 2222
2. Run this curl command to get token to get member id:
curl -X POST -u admin:<admin user password> -H -V https://<CLUSTER-IP>/api/system/v1/identitymgmt/token
Enterprise Switching Business Unit is glad to announce Beta release 16.12.2 for all Catalyst 9200/9300/9400/9500/9600 and Catalyst 3650/3850 Platforms. This release is made available to allow users to test, evaluate and share fee...
Purpose of the document
This document describes the general recommendations or best practices when designing and deploying the Cisco SD-Access technology. The document assumes that the reader has a general overview of Cisco's SD-Access for Distributed C...