I used this configure:
ip multicast-routing
ip pim rp-address 192.168.10.1
interface FastEthernet0/0
description link to Patong
ip address 172.20.246.46 255.255.255.252
ip pim sparse-mode
load-interval 30
duplex auto
speed auto
!
interface FastEthernet0/1
description link LAN Decode
ip address 192.168.101.1 255.255.255.0
ip pim sparse-mode
ip igmp static-group 239.70.10.10
load-interval 30
duplex auto
speed auto
I found it high cpu.
Router#sho proc cpu sor 5se
CPU utilization for five seconds: 86%/37%; one minute: 86%; five minutes: 86%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
80 36487776 148941564 244 47.91% 48.07% 48.15% 0 IP Input
4 67672 8757 7727 0.39% 0.08% 0.06% 0 Check heaps
How should I do
