07-15-2011 12:53 PM - edited 03-04-2019 01:00 PM
Hi ,
Im trying to change my fa0/0 port`s mac address so my broadband will work through my 1841 as my BB is setup to run from the mac address of the old router and i need to set this on up with the old mac address in order for my internet to work ?
I have searched google etc but not much there for the 1841 series ...
Thanks in advance
Solved! Go to Solution.
07-15-2011 01:52 PM
You should be able to just go under the interface and type "mac-address" with the MAC you want to use.
07-15-2011 01:06 PM
try clearing the arp
07-15-2011 01:10 PM
Hi,
im sorry but i dont think i explained correcly ... i need to clone hardware mac address from old router into port fa0/0 for my virgin internet to work through this router.
My BB is mac controlled that is why i need to edit the address on the 1841 to match the old router.
thanks again
07-15-2011 01:52 PM
You should be able to just go under the interface and type "mac-address" with the MAC you want to use.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: