Hi,
Please see this configuration:
controller SONET 1/0
au-4 1 tug-3 2
tug-2 2 e1 3 channel-group 0 timeslots 1
tug-2 2 e1 3 channel-group 1 timeslots 2
tug-2 2 e1 3 channel-group 2 timeslots 3
tug-2 2 e1 3 channel-group 3 timeslots 4
tug-2 2 e1 3 channel-group 4 timeslots 5
end
When I type for example " no tug-2 2 e1 3 channel-group 2 timeslots 3 " the router accepts the command but
tug-2 2 e1 3 channel-group 2 timeslots 3 is still in configuration file. The router is 7206VXR with following software:
Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 12.4(4)T1
STM-1 port adapter:PA-MC-STM-1SMI
Does anyone have any idea why this command is not executed?
Thanks,
